ALTERA DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH 
WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH 
WILL BE UNINTERRUPTED OR ERROR-FREE. 

//**************************************************************** 
quartus-11.1-1.14-readme.txt 
Readme file for Quartus II 11.1 SP1 Patch 1.14
Copyright (C) Altera Corporation 2012 All right reserved. 
Patch created on January 20 2012
Patch SPR#: 31794 
SPRs fixed: 
//**************************************************************** 

Problem: 1. When tx address insertion feature is disable and pause
	    frame generation feature is used on the 10G MAC, the 10G MAC will not
      	    insert the source address field to the generated pause frame.

	 2. When CRC insertion is disable, the CRC will not added to
	    the MAC generated pause frame.


Solution: Solution for this will be regardless of the configuration,
	  MAC will insert the source address and CRC for the pause frame.

	  After the fix, if user choose not to insert source address, MAC will
	  not insert the source address for normal frame but the generated pause
	  frame will contain the source address that being set by user. 

	  User can set the source address for transmit path on registers:
    	  tx_addrins_macaddr0 and tx_addrins_macaddr1.

	  In addition, regardless of the configuration, generated pause frame
	  will contain the CRC if CRC on transmit path had been enabled.


Caution - You must either have previously installed the 
          Quartus II 11.1 SP1 software or must 
          install the Quartus II 11.1 SP1 software 
          before installing this patch. Otherwise, the patch will 
          not be installed correctly and the Quartus II 
          software will not run properly.