ALTERA DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH 
WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH 
WILL BE UNINTERRUPTED OR ERROR-FREE. 

//**************************************************************** 
quartus-10.0-1.158-readme.txt 
Readme file for Quartus II 10.0 SP1 Patch 1.158
Copyright (C) Altera Corporation 2010 All right reserved. 
Patch created on October 19 2010
Patch SPR#: 357162 
SPRs fixed: 355137, 356903
//**************************************************************** 

Problem:  The Quartus II software incorrectly sets the clock and data
	  recovery (CDR) unit in Stratix IV GX/GT and Arria II GX 
	  transceivers when they are configured in any mode except
	  PCIe mode and the CDR is configured in automatic lock mode.
	  This may cause incorrect data to be recovered.


Solution: This patch resolves the problem by setting the CDR unit
	  correctly.  Refer to the Stratix IV GX/GT and Arria II GX
	  Errata Sheets for more details:

	    http://www.altera.com/literature/es/es_stratixiv_gx.pdf
	    http://www.altera.com/literature/es/es_stratixiv_gt.pdf
	    http://www.altera.com/literature/es/es_arriaii_gx.pdf


Caution - You must either have previously installed the 
          Quartus II 10.0 SP1 software or must 
          install the Quartus II 10.0 SP1 software 
          before installing this patch. Otherwise, the patch will 
          not be installed correctly and the Quartus II 
          software will not run properly.