The following tables list the features, specifications, and the software package for the MSC Industrial Reference Platform.
| Intel® AtomTM Processor Z530PT | Altera® Arria® GX Series FPGA |
|---|---|
|
1.6-GHz processor frequency |
TriMatrix memory structure performance up to 380 MHz |
|
IA32 architecture |
12 transceiver channels (600 Mbps to 3.125 Gbps) |
|
32-KB instruction and 24-KB data (L1) caches |
Optional Nios® II softcore processor |
|
512-MB, 8-way set-associative L2 cache |
Multiple clock networks, RAM blocks, and digital signal processing (DSP) blocks |
|
533-MHz Front-Side Bus (FSB) |
90,220 logic elements for system design |
|
2.2-W maximum TDP (power) |
Up to 538 I/O pins |
|
13-mm x 14-mm package, PBGA 441 Socket |
35-mm x 35-mm 1,152-pin FBGA package |
| System Features | |
|---|---|
|
Intel SCH US15W chipset with I/O controller on Qseven board (4.5 W) |
2 x 20 characters LCD display and 8 LEDs for information display and system debug |
|
1-GB DDR system memory |
Factor clock and reset control |
|
3x Gigabit Ethernet ports (1 PCIe module on Qseven, 2 ports on the FPGA board) |
Eight input/8 output opto-isolated I/Os, 16 GPIOs, 5 push buttons, and 4 DIP switches |
|
2x SATA-2 controllers (PCIe) module |
2x CAN interfaces |
|
250-GB HDD pre-installed with Linux OSADL |
2x RS-485 fieldbus interfaces |
|
DVI-D interface or internal LVDS backlit kit |
2x RS-232 serial interfaces |
|
Eight USB 2.0 ports |
4x A/D and 4x D/A converters |
|
SD card socket |
Configuration FLASH |
|
PCI Express x1 interface to the FPGA |
Altera USB-BlasterTM |
|
291-mm x 74-mm x 100-mm (L x W x H) |
110/230VAC PSU (24V VDC input) |
|
MSC Hpe®_desk development/debug tools, including JTAG and SEmulator® |
Altera Quartus® II design software with SOPC Builder (download) |
| Software Package |
|---|
|
Linux OSADL |
|
3S CoDeSys IEC61131 run-time software (evaluation copy) |
|
Reference design examples |
|
Pre-installed reference platform configuration |
