from Altera Corporation
The DSP Development Kit, Stratix® III Edition is RoHS compliant and delivers a complete digital signal processing (DSP) development environment. The kit facilitates the entire design process from design conception through hardware implementation. The DSP Development Kit, Stratix III Edition includes the Stratix III FPGA development board, a data conversion high-speed mezzanine card (HSMC), the DSP Builder development tool, Quartus® II development software, MATLAB/Simulink evaluation software, evaluation intellectual property (IP) cores, design examples, power supplies, cables, and documentation.
Ordering Information
Table 1 provides the ordering code and pricing information for the DSP Development Kit, Stratix III Edition.
| Table 1. DSP Development Kit, Stratix III Edition Ordering Code and Pricing Information | ||
| Ordering Code | Price | Ordering Information |
|---|---|---|
| DK-DSP-3SL150N | $2,895 |
In North America, call 1-888-800-0631. For international sales, contact your local distributor. |
Development Kit Contents
The DSP Development Kit, Stratix III Edition features:
- Stratix III Development Board (see Figure 1)
- High-performance Stratix III EP3SL150F1152 FPGA
- DDR2 SDRAM and QDR II SRAM
- PSRAM and flash memory
- USB 2.0 MAC/PHY
- Graphics and character LCD displays
- On-board embedded USB-BlasterTM download cable
- Data Conversion HSMC
- Two 14-bit, 150-million samples per second (MSPS) analog to digital (A/D) converters
- Two 14-bit, 250-MSPS digital to analog (D/A) converters
- Audio in/out/mic
- Power regulators and data converters
- LTM4601EV: 12-A DC/DC µModule
- LTC3026EDD: 1.5-A low input voltage VLDO linear regulator
- LT1761ES5-SD: 100-mA, low noise, LDO micropower regulators in SOT-23
- LT1374CFE: 4.5-A, 500-kHz step-down switching regulator
- LT1931AES5: 1.2/2.2-MHz inverting DC/DC converters in ThinSOT
- LTC2402CMS: 1/2-channel 24-bit µPower no latency delta-sigma ADC in MSOP-10
- Stratix III FPGA Development Kit, CD-ROM
- Design examples for the Stratix III FPGA development board
- Complete documentation
- User guide
- Reference manual
- Board schematic and layout
- Bill of materials
- Product and partner information
- Altera® Complete Design Suite DVD
- Quartus II Development Kit Edition design software
- ModelSim®-Altera software
- Altera MegaCore® IP Library (simulation and hardware evaluation)
- Nios® II Embedded Design Suite (EDS), Evaluation Edition (free)
- DSP Builder
- Video demos of Quartus II software and the Nios II processor
- System reference designs and labs
- DSP Builder filtering design
- Nios II processor reference designs
- MATLAB/Simulink 30-day evaluation software
HSMC Interface
Altera developed the specification for the HSMC, which is based on the Samtec mechanical connector, to define and standardize the interface between optional daughtercards and host boards. This specification outlines both the electrical and mechanical properties of the interface between daughtercard and host. You can also create your own HSMC interface-compatible daughtercards.
Figure 1. Stratix III FPGA Development Board
Figure 2 shows the data conversion HSMC.
Figure 2. Data Conversion HSMC
