from Terasic
The DE0-Nano Development Board is a compact-sized FPGA development platform suited for prototyping circuit designs such as robots and "portable" projects. The board is designed to be used in the simplest possible implementation targeting the Cyclone® IV device up to 22,320 logic elements (LEs).
This platform:
- Allows you to extend designs beyond the DE0-Nano board with two external general-purpose I/O (GPIO) headers
- Allows you to handle larger data storage and frame buffering with onboard memory devices including SDRAM and EEPROM
- Provides enhanced user peripheral with LEDs and push buttons
- Is small and lightweight
- Is reconfigurable without requiring superfluous hardware
- Is suitable for mobile designs where portable power is crucial, as it provides three power scheme options including a USB Mini-AB port, 2-pin external power header, and two DC 5-V pins
Ordering Information
Table 1. DE0-Nano Development Board Ordering Code and Pricing Information |
||
| Ordering Code | Price | Ordering Information |
|---|---|---|
| P0082 | $86.25 |
Order online via Altera's eStore. |
Development Kit Contents
The DE0-Nano Development Board includes the following:
- Cyclone IV EP4CE22F17C6N FPGA
- 22,320 LEs
- 594-Kb embedded memory
- 66 embedded 18x18 multipliers
- 4 general-purpose phase-locked loops (PLLs)
- 153 maximum FPGA I/O pins
- Configuration status and set-up elements
- Onboard USB-BlasterTM circuit for programming
- Altera® serial configuration device – EPCS16
- Expansion header
- Two 40-pin headers (GPIOs) provides 72 I/O pins
- Two 5-V power pins, two 3.3-V power pins, and four ground pins
- One 26-pin header provides 16 digital I/O pins and 8 analog input pins to connect to analog sensors
- Memory devices
- 32-MB SDRAM
- 2-Kb I2C EEPROM
- General user input/output
- 8 green LEDs
- 2 debounced push buttons
- 4 dual in-line package (DIP) switches
- G-sensor
- ADI ADXL345, 3-axis accelerometer with high resolution (13 bits)
- Analog-to-digital converter
- NS ADC128S022, 8-channel, 12-bit analog-to-digital converter
- 50 ksps to 200 ksps
- Clock system
- Onboard 50-MHz clock oscillator
- Power supply
- USB Type Mini-AB port (5 V)
- Two DC 5-V pins of the GPIO headers (5 V)
- 2-pin external power header (3.6 V – 5.7 V)
- Connectivity
- Connect D5M
- Connect with 5-megapixel CMOS sensor (D5M)
- Connect LTM
- Connect with LCD touch screen module (LTM)
- Connect THDB-ADA
- Connect with analog-to-digital / digital-to-analog conversion daughtercard (THDB-ADA)
- Connect D5M
- USB Mini-B cable
- DE0-Nano system CD
- Altera Complete Design Suite
- DE0-Nano quick start guide
Figure 1. DE0-Nano Development Board
Documentation
| Table 2. DE0-Nano Development Board Documents Available | |
| Document | Description |
|---|---|
| User manual | Information about the DE0-Nano board features and architecture, using the board and configuring the FPGA, setting up the control panel, using DE0-Nano System Builder to build a Quartus® II project, and two tutorials: creating an FPGA project and creating a Nios® II processor project. |
| CD-ROM | Detailed information about board and control panel. |
| Demos | 4 demos: Breathing LEDs, ADC Reading, SOPC Demo, G-Sensor |
Related Links
Disclaimer
Note: Products sold through this website that do not bear the Altera brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Altera’s standard terms and conditions of sale do not apply to products that are not Altera-branded, even if packaged or sold with Altera products. Please contact the manufacturer directly for technical support and customer service.
