POS-PHY Level 2 and 3 Compiler
from Altera Corporation
Features
- Link-layer or PHY-layer POS-PHY interfaces
- Bridges between different POS-PHY interfaces
- Single-PHY (SPHY) or up to 8-channel multi-PHY (MPHY) operation, with configurable FIFO buffers
- AtlanticTM interface allows a consistent interface between all Altera® cell and packet MegaCore® functions
- Many POS-PHY bus widths (8 bits, 16 bits, 32 bits) and Atlantic system bus widths (8 bits, 16 bits, 32 bits, 64 bits)
- Easy-to-use IP Toolbench interface and functional simulation models in Verilog and VHDL
Applications
- Up to OC-48 rate packet over SONET (POS) or packet over Asynchronous Transfer Mode (ATM) interface in Internet protocol switch/routers, WAN switches, SONET cross connects, or multiplexers
- Interconnect for SONET framer to Ethernet media access control (MAC), or ATM link layer to PHY devices
- Bridge or aggregation for POS-PHY to POS-PHY or Ethernet MAC
Standards Compliant
- Conforms to POS-PHY Level 2 and Level 3 specifications
- POS-PHY Level 3 compliant with thePOS-PHY Level 3 Specification, Issue 4, June2000; POS-PHY Level 2 compliant with the POS-PHY Level 2 Specification, Issue 5, December 1998
High Performance
- Supports traffic up to a rate of 3.2 Gbps in POS-PHY Level 3 (OC-48) and 832 Mbps in POS-PHY Level 2
- Up to 350-MHz intellectual property (IP) core frequency
General Description
The POS-PHY Level 2 and 3 compiler generates MegaCore functions for use in link-layer or PHY devices that transfer data to and from packet over SONET/synchronous digital hierarchy (SDH) devices using the standard POS-PHY bus. The compiler comprises separately configurable modules, which can be easily combined via the IP Toolbench to generate a highly parameterized module, allowing POS-PHY compliant interfaces (and non-standard interfaces) to be included in custom designs. Figure 1 shows the possible interfaces. Figure 2 shows the possible bridges.
Figure 1. Interfaces
Figure 2. Bridges
Atlantic Interface
The Atlantic interface allows a consistent interface between all Altera cell and packet MegaCore functions. The Atlantic interface supports a point-to-point connection.
For more information on the Atlantic interface, refer to FS 13: Atlantic Interface.
OpenCore Plus Evaluation
Use the Altera OpenCore Plus Evaluation flow to test drive this IP core.
Performance
Typical expected performance and utilization figures for this MegaCore function are provided in the POS-PHY Level 2&3 Compiler User Guide (PDF).
Technical Support
Technical support for this MegaCore function is provided by the Altera mySupport online issue tracking system. You may also search the Altera Knowledge Database for topics related to this function.
Related Documents
|
Literature
> 
