Altera Home Page
Literature Licensing
Buy On-Line Download

  Home   |   Products   |   Support   |   End Markets   |   Technology Center   |   Education & Events   |   Corporate   |   Buy On-Line  
  Devices   |   Design Software   |   Intellectual Property   |   Design Services   |   Dev. Kits/Cables   |   Literature  

 IP Products
   Embedded Processors
   Interfaces & Peripherals
   DSP
   Communications
          Cell/Packet
          SONET/SDH
          PDH (T/E Carrier)
          Encoding/Decoding
          HDLC
          UTOPIA
          POS-PHY
          Bluetooth
          FlexBus
          CSIX
          Additional Functions
          Consortiums
          Literature
  
 About IP
      Designing with IP
      Evaluate and Download IP
      IP Certifications
      System Design
      Request IP
  
 IP Industry Partners
      About AMPP Program
      AMPP Core Partners
  

STM-0/1/4 (STS-1/3/12) Framer

from Aliathon

Request Free Evaluation



AMPP Approved
OpenCore Support



Features

  • Supports all SONET equivalents of SDH functionality
  • Generates SDH frames for STM-0/1/4
    • The core may be dynamically switched between SDH rates
  • Scrambles the SDH frames
  • Inserts regenerator section overhead and calculates B1 values
  • Inserts multiplex section overhead and calculates B2 values
  • Generates all AU pointers (up to 12 for VC3 over STM-4)
  • Inserts VC3, VC4, and VC4-4c, channelised and single-channel
    • All legal combinations of VCs are supported
    • VC settings may be dynamically reconfigured on a per VC basis
  • Generates B3 values for all VCs
  • Inserts higher order path overhead

Block Diagram

Figure 1 shows a block diagram of the function.

Figure 1. Framer Block Diagram
Figure 1. Demaper Block DiagramClick for full detail (53 KB)

Description

The Aliathon STM-0/1/4 (STS-1/3/12) Framer core provides a flexible, resource-efficient, programmable logic based solution for SONET/SDH interfaces. It supports both concatenated payloads (e.g., VC4-4c over STM-4) and channelized (e.g., multiple VC3s over STM-1). The core supports all of the specified rates and may be dynamically switched to any of those rates. The core is supported for Stratix® II, Stratix GX, and Cyclone™ FPGAs.

Device Utilization & Performance

Table 1 lists the typical device utilization for the megafunction.

Table 1. Typical Device Utilization for the Megafunction
Target Device Speed Grade Utilization Performance
(fMAX)
Parameter
Setting
LEs (1) ESBs (2)
Cyclone -7 1,053 - 90+ MHz Contact Aliathon
Stratix -7 1,065 - 90+ MHz Contact Aliathon
Stratix II -5 549 - 100+ MHz Contact Aliathon

Notes:

  1. LEs = Logic elements. The LE count for Stratix II devices is based on the number of adaptive look-up tables (ALUTs) used for the design as reported by the Quartus® II software.
  2. ESBs = Embedded system blocks

Contact Information

For additional information, contact Aliathon at:

Evans Business Centre
Pitreavie Court
Dunfermline
Fife KY11 8UU
United Kingdom

Tel: +44 (0) 1383 737736
Fax: +44 (0) 1383 749501

E-mail: info@aliathon.com
URL: www.aliathon.com

  Please Give Us Feedback