Altera Home Page
Literature Licensing
Buy On-Line Download

  Home   |   Products   |   Support   |   End Markets   |   Technology Center   |   Education & Events   |   Corporate   |   Buy On-Line  
  Devices   |   Design Software   |   Intellectual Property   |   Design Services   |   Dev. Kits/Cables   |   Literature  

 IP Products
   Embedded Processors
   Interfaces & Peripherals
          Peripherals
          PCI
          PCI Express
          Memory Controllers
          USB
          PCMCIA
          Ethernet
          I2C
          CAN
          PowerPC Bus
          HyperTransport
          RapidIO
          SerialLite
          Additional Functions
          Consortiums
          Literature
   DSP
   Communications
  
 About IP
      Designing with IP
      Evaluate and Download IP
      IP Certifications
      System Design
      Request IP
  
 IP Industry Partners
      About AMPP Program
      AMPP Core Partners
  

PCI Bus Arbiter

from Eureka Technology Inc.

View Literature
Request Free Evaluation



AMPP Approved
OpenCore Support
DSP Builder Ready



Features

  • Complies with PCI bus specification 2.2
  • Designed for programmable logic device (PLD) and ASIC implementation in various system environments
  • Fully static design with edge-triggered flip-flops
  • Supports two to any number of bus masters
  • Bus parking
  • Fast request-to-grant turnaround time
  • Quiet cycle during master switch
  • Master time-out

Block Diagram

Figure 1 shows the block diagram for the PCI bus arbiter megafunction.

Figure 1. Block Diagram

PCI Bus Arbiter megafunction

Description

The PCI bus arbiter performs bus arbitration among multiple masters on the PCI bus. Any number of bus masters can reside on the PCI bus, as well as requests for the bus. One pair of request and grant signals is dedicated to each bus master.

The PCI bus arbiter implements either rotating priority or a fixed priority scheme. In the rotating priority scheme, the requestor that is most recently granted the bus receives the lowest priority, while the requestor position next to it receives the highest priority. The remaining requestor receives subsequently lower priority based on its position.

This megafunction is available in Altera hardware description language (AHDL), Verilog, VHDL, and netlist format. Megafunction sizes vary with features and customization. Eureka Technology can customize the design according to specific user requirements. Please contact Eureka Technology or visit the Eureka Technology web site for a complete data sheet.

Device Utilization Example

Table 1 lists the typical device utilization results for the megafunction.

Table 1. Typical Device Utilization for the Megafunction
Device Speed Grade Utilization Performance
(fMAX)
Parameter Setting
Logic Cells EABs (1)
FLEX
APEX
ACEX
  250 0 33 MHz Contact
Eureka Technology

Note:

  1. EABs = Embedded array blocks

Contact Information

For additional information, contact Eureka Technology, Inc. at:

Eureka Technology, Inc.
4962 El Camino Real
Suite 108
Los Altos, CA 94022
Tel. (650) 960-3800
Fax (650) 960-3805
E-mail: info@eurekatech.com
WWW: http://www.eurekatech.com

  Please Give Us Feedback