This design demonstrates a Stratix® IV device interfacing with 18-bit wide QDR II+ SRAM running at 400 MHz.
The design features advanced I/O timing, board trace models, and the SignalTap® II logic analyzer in Quartus® II software. It is mapped to the Stratix IV GX Development Kit.
A walkthrough of the process is described in External Memory Interface Handbook Volume 6, Section II UniPHY Design Tutorial (PDF). Please refer to the Using QDR II and QDR II+ SRAM in Arria II, Stratix III, Stratix IV, and Stratix V Devices chapter for the full design guidelines and flow.
This design includes Tcl files for:
- Example driver "output ports" virtual pin assignments
- Pin location assignments for the Stratix IV GX Development Kit QDR II+ SRAM Interface
Download the files used in this example:
- Download emi_qdrii_plus_siv_readme.txt
- Download emi_qdrii_plus_siv.zip
Related Links
- External Memory Interface Handbook Volume 6, Section II UniPHY Design Tutorial (PDF)
- Stratix IV GX Development Kit
Design Examples Disclaimer
These design examples may only be used within Altera Corporation devices and remain the property of Altera. They are being provided on an “as-is” basis and as an accommodation; therefore, all warranties, representations, or guarantees of any kind (whether express, implied, or statutory) including, without limitation, warranties of merchantability, non-infringement, or fitness for a particular purpose, are specifically disclaimed. Altera expressly does not recommend, suggest, or require that these examples be used in combination with any other product not provided by Altera.
