| Solutions for Category: Development Kits | |
| Results 1 - 10 of about 45. | |
| Hide Description | 15 Show 100 Show Next |
| 1 | Are there any known issues with the Stratix IV GX Development Kit? Programming with EthernetBlaster This problem affects Rev A and Rev B production boards of the Stratix® IV GX Development Kit which contain a p/n sticker that end in -EN130A,… www.altera.com/support/kdb/solutions/rd06242009_293.html - 2010-08-30 |
|
| 2 | Why do I get the following error "Older Altera tools detected, Please install at least Quartus Programmer 9.0" when trying to open the BoardTestSystem.exe utility? You will receive the "Older Altera® tools detected, Please install at least Quartus® Programmer 9.0" error when trying to open the BoardTestSystem utility when you have an older ve… www.altera.com/support/kdb/solutions/rd08262010_578.html - 2010-08-30 |
|
| 3 | Why does the transceiver gxb_locked signal not assert in the Serial RapidIO 1.25 Gbps version of the Serial RapidIO to TI 6488 DSP Reference Design? The transceiver gxb_locked signal not assert in the Serial RapidIO 1.25 Gbps version of the Serial RapidIO to TI 6488 DSP Reference Design due to an error in the verilog code. The… www.altera.com/support/kdb/solutions/rd08022010_503.html - 2010-08-26 |
|
| 4 | Are there any known issues with the Cyclone III FPGA Development Kit? LCD_D_CSn I/O Pin Assignment The Cyclone® III FPGA Development Kit Reference Manual has incorrect pin out information for the LCD peripheral. In Table 2-36, the … www.altera.com/support/kdb/solutions/rd07122010_741.html - 2010-08-02 |
|
| 5 | Are there any known issues with the Cyclone IV GX Transceiver Starter Kit? refclk_125_p I/O Standard The Cyclone® IV GX Transceiver Starter Kit example designs for Quartus® II software version 9.1 have an issue with a missing&nbs… www.altera.com/support/kdb/solutions/rd04292010_819.html - 2010-08-02 |
|
| 6 | If I have a defective Altera development kit and it was purchased within the last year how do I file for an RMA? If you purchased an Altera® development kit within the last 12 months, you may file for an RMA if your kit is defective. To file for an RMA you will need to know where the kit… www.altera.com/support/kdb/solutions/rd07212010_505.html - 2010-08-02 |
|
| 7 | Are there any known issues with the Cyclone IV GX Starter Kit? pcie_refclk_p I/O Standard The Cyclone® IV GX Starter Kit version 9.1 includes an example design called golden_top. The design is missing an I/O Standard for the p… www.altera.com/support/kdb/solutions/rd07062010_569.html - 2010-07-06 |
|
| 8 | Are Altera Development Kits UL certified? No, Altera® Development Kits are not Underwriters Laboratories (UL) certified. www.altera.com/support/kdb/solutions/rd04022009_705.html - 2010-06-10 |
|
| 9 | Are the gerber and layout files available for the DE2 Development and Education Board? No, the gerber and layout files are not available for the DE2 Development and Education Board. All the files that are available are included in the CD which comes with the kit or c… www.altera.com/support/kdb/solutions/rd12222008_252.html - 2010-06-10 |
|
| 10 | Can I have the PCI Express Development Kit, Stratix II GX Edition plugged into the PCI Express slot as well as an external power supply? No, you cannot power the PCI Express Development Kit, Stratix® II GX Edition from a power supply connected to a wall outlet and have it plugged into a… www.altera.com/support/kdb/solutions/rd04032007_349.html - 2010-06-10 |
| Next |
