Solution ID: rd07231999_3627
Last Modified: Feb 13, 2006
Product Category: N/A
Product Area: N/A
Product Sub-area: N/A
Error: " An error occured during the move data process: -106." (Quartus<SUP></SUP>, MAX+PLUS<SUP>®</SUP> II)
DescriptionYou may get this error message when installing the Quartus or MAX+PLUS II software, or when copying the contents of the installation CD-ROM to your hard drive. The exact error message may look like the following:
Installation [Tool Name] <version_number> Setup An error occurred during the move data process: -106 Component: [Component Name] File Group: <group_name> File: <filename>
This error may occur for the following reasons:
- There is not enough free space on the hard drive to install the software. In this situation you must create more room on the hard drive, or install the software on a different hard drive.
- The contents of the CD-ROM cannot be read properly due to variations
in the physical media. Although the CD-ROM is not defective, some CD-ROM
drives are more susceptible to these variations than others and cannot properly read the contents of the CD-ROM.
In this situation, you can eliminate the error message by trying to use the CD-ROM on a different computer that may not be as susceptible to the variations in the CD-ROM, or you can replace the CD-ROM.
- The CD-ROM is defective. In this situation, you must replace the CD-ROM.
To request a replacement Quartus or MAX+PLUS II CD-ROM, email Altera Customer Service at firstname.lastname@example.org. Include the following information in your email:
- Full name
- Mailing address that will accept a Federal Express delivery (no PO boxes)
- Phone number
- Software requested
You can also contact Altera Customer Service by calling (800) SOS-EPLD.
Altera does not warrant that this solution will work for the customer's intended purpose and disclaims all liability for use of or reliance on the solution.