• All Altera Sites
  • Knowledge Base
  • Support & Technical Docs
  • Forums & Wiki


Home > Support > Knowledge Base > Support Solution

Solution ID: rd07262004_8890
Last Modified: May 23, 2007
Product Category: Devices
Product Area: Programming (CPLD/Config Dev)
Product Sub-area: Other (Programming)
Device Family: CYCLONE

Title

What input file should be used to program a Serial Configuration Device (EPCS)?

Description

If you are using the Quartus®II Programmer, the input file must be a Serial Configuration Device Programmer Object File (POF). If you are using an embedded programmer, such as SRunner, you can use the Raw Programming Data File (RPD) as the input file to program the Serial Configuration Device. The RPD file contains only device-specific binary programming data.

Feedback

     This solution answers my question:
Strongly Disagree
   
Strongly Agree
 
  1 2 3 4 5  
     This solution was easy to find:          
Strongly Disagree
   
Strongly Agree
 
  1 2 3 4 5  

    Please provide additional feedback to improve support solutions:

Altera does not warrant that this solution will work for the customer's intended purpose and disclaims all liability for use of or reliance on the solution.
Please Give Us Feedback