Literature Licensing Buy On-Line Download Entire Site Part Number Knowledge DB

Home   |   Products   |   Support   |   End Markets   |   Technology Center   |   Education & Events   |   Corporate   |   Buy On-Line

Knowledge Database   |   Devices   |   Design Software   |   Intellectual Property   |   Design Examples   |   mySupport   |   Reference Designs

Products    Quartus II       SOPC Builder       MAX+PLUS II       ModelSim-Altera     Resource Centers       Overview       Installation & Licensing       Scripting       Board Design & I/O       Design Entry & Planning       Synthesis & Netlist Viewers       Incremental Compilation       Optimization       Power Management    TimeQuest Timing Analyzer       Classic Timing Analyzer       Simulation & Verification       On-Chip Debugging       HardCopy Design     Software Resources       OS Support       Driver Installation     Download & Licensing       Download    Licensing     Quartus II EDA Support       Quartus II Interface    Synthesis Tools    Simulation Tools    Formal Verification Tools    Timing Analysis Tools    Physical Synthesis Tools    Board Level Tools     Legacy Sw. EDA Support       View by Vendor       View by Tool       View by Function

Home > Support > Design Software > Driver Installation > Altera Programming Unit (APU) USB Driver Information for Windows 98 Print This Page Subscribe to Email Altera Programming Unit (APU) USB Driver Information for Windows 98 Windows will prompt you to install the Altera Programming Unit universal serial bus (USB) driver the first time the APU is plugged in. Quartus II - Driver Installation When you plug in the APU USB cable, Windows 98 will automatically recognize it and start the Add New Hardware wizard. Click Next in the Add New Hardware Wizard window Click Next Choose Display a list of all the drivers in a specific location and click Next Choose Universal Serial Bus controller from the list of devices and click Next Click the Have Disk... button Click Browse in the Install From Disk window Browse to the <Path to Quartus® II software>\drivers directory and click OK Click OK in the Install From Disk window Choose APU - Altera Programming Unit in the Models list and click Next Click Next to install the driver Click Finish Set up programming hardware in the Quartus II software to complete your installation. MAX+PLUS II 10.12 - Driver Installation When you plug in the APU USB cable, Windows 98 will automatically recognize it and start the Add New Hardware wizard. Click Next in the Add New Hardware Wizard window Click Next Choose Display a list of all the drivers in a specific location and click Next Choose Universal Serial Bus controller from the list of devices and click Next Click the Have Disk... button Click Browse in the Install From Disk window Browse to the <Path to MAX+PLUS® II software>\Drivers\apu directory and click OK Click OK in the Install From Disk window Choose APU - Altera Programming Unit in the Models list and click Next Click Next to install the driver Click Finish Set up programming hardware in the MAX+PLUS II software to complete your installation MAX+PLUS® II software version 10.11 and earlier does not support the APU. To download MAX+PLUS II software updates, go to the MAX+PLUS II Software Updates web page. Rate This Page

Please Give Us Feedback

Home | Products | Support | End Markets | Technology Center | Education & Events | Corporate | Buy On-Line  Knowledge Database | Devices | Design Software | Intellectual Property | Design Examples | mySupport | Reference Designs  Contact Us | Site Help | Site Map | Privacy | Legal Notice  Copyright © 1995-2008 Altera Corporation, 101 Innovation Drive, San Jose, California 95134, USA Altera, Stratix, Arria, Cyclone, MAX, HardCopy, Nios, Quartus and MegaCore are trademarks of Altera Corporation