Literature Licensing Buy On-Line Download Entire Site Part Number Knowledge DB

Home   |   Products   |   Support   |   End Markets   |   Technology Center   |   Education & Events   |   Corporate   |   Buy On-Line

Knowledge Database   |   Devices   |   Design Software   |   Intellectual Property   |   Design Examples   |   mySupport   |   Reference Designs

Products    Quartus II       SOPC Builder       MAX+PLUS II       ModelSim-Altera     Resource Centers       Overview       Installation & Licensing       Scripting       Board Design & I/O       Synthesis & Netlist Viewers       Incremental Compilation       Optimization       Power Management    TimeQuest Timing Analyzer       Classic Timing Analyzer       Simulation & Verification       On-Chip Debugging       HardCopy Design     Software Resources       OS Support       Driver Installation     Download & Licensing       Download    Licensing     Quartus II EDA Support       Quartus II Interface    Synthesis Tools           DK Design Suite           Design Compiler           LeonardoSpectrum           Precision RTL Synthesis           Synplify    Simulation Tools    Formal Verification Tools    Timing Analysis Tools    Physical Synthesis Tools    Board Level Tools     Legacy Sw. EDA Support       View by Vendor       View by Tool       View by Function

Home > Support > Design Software > Synthesis Tools > Synplify Print This Page Subscribe to Email About Using the Synplify Software with the Quartus II Software You can use the Synplicity Synplify design entry/synthesis tool to create, synthesize, and optimize a project and then generate an Verilog Quartus Mapping File (.vqm) for compilation in the Quartus II software. The following topics describe the typical flow with the Synplify software and the Quartus II software: Set up the Synplify working environment Create a design for use with the Synplify software Set up a project with the Synplify software Assign design constraints with the Synplify software Generate Verilog Quartus Mapping Files with the Synplify software Analyze design results with the Synplify software You can also run the Synplify software automatically from within the Quartus II software to synthesize a design using the NativeLink feature. You can use Altera-provided megafunctions in the Synplify software by using the MegaWizard Plug-In Manager to create custom megafunction variations that are based on Altera-provided megafunctions, including library of parameterized modules (LPM) functions and Altera megafunctions. Refer to the following topics for information on how to use specific megafunctions: Creating and Instantiating a VHDL Function for Use with the Synplify Software Creating and Instantiating a Verilog HDL Function for Use with the Synplify Software You can use the same procedures and principles to use similar megafunctions in other designs.   More information is available on other EDA design entry/synthesis tools on the Altera website.     Rate This Page

Please Give Us Feedback

Home | Products | Support | End Markets | Technology Center | Education & Events | Corporate | Buy On-Line  Knowledge Database | Devices | Design Software | Intellectual Property | Design Examples | mySupport | Reference Designs  Contact Us | Site Help | Site Map | Privacy | Legal Notice  Copyright © 1995-2008 Altera Corporation, 101 Innovation Drive, San Jose, California 95134, USA Altera, Stratix, Arria, Cyclone, MAX, HardCopy, Nios, Quartus and MegaCore are trademarks of Altera Corporation