banner

Find Offerings

Switch to Partners

By Source
Offering Types
Region
Device Family
Market Segments
Program Level
Sort by

Loading

Boards / SOMs / Dev Kits COTS Daughter Card Development / Evaluation Kit DPU / IPU / AI NIC / SmartNIC PCI Express System-on-Module (SOM) VPX
By Source
Offering Types
Region
Device Family
Market Segments
Program Level
Sort by

MitySOM-5CSx Cyclone® V SoC System on Module

Critical Link's MitySOM-5CSx is a family of system on modules designed around the Altera Cyclone® V SoC. In addition to the Cyclone® V, these SOMs feature DDR3 CPU/FPGA RAM with ECC, additional dedicated DDR3 FPGA RAM, QSPI NOR, on board power supplies, and a host of interfaces. MitySOM-5CSx is a product-ready solution designed for long term availability and performance in industrial applications.

View Details Right arrow Right arrow
/

N-EMB-100 ZEKE EtherCAT Master_Slave

The N-EMB-100 platformThe N-EMB-100 is a high-performance industrial device platform equipped with an Cyclone® V SoC. It has two Arm Cortex-A9 processor cores and can use Linux, etc. in SMP mode. It has four RJ45 connectors: two ports for Arm-side Gigabit Ethernet and two ports for FPGA-side EtherCAT. Since it is equipped with two 10/100 PHYs on the FPGA side, it can also use Altera's TSE MAC IP, etc. QSPI or microSD cards can be used as boot memory, and the boot source can be selected with jumpers on the board. This board can be used in a variety of EtherCAT (hardware master/software master and slave) applications.Hardware Master: You can evaluate our hardware master using the Ethernet on the FPGA side.Software Master: You can implement various paid software masters using the Ethernet on the Arm side. We can also provide a demo environment with an open-source master stack implemented.Slave: It can also be used as a slave by implementing an EtherCAT slave IP, such as one made by BECKH

View Details Right arrow Right arrow
/

N-EMB-110 ZEKE-G EtherCAT Master_Slave

The N-EMB-110 is a high-performance industrial device platform equipped with a Cyclone® V SoC. It has two Arm Cortex-A9 processor cores and can use Linux, etc. in SMP mode. It has four RJ45 connectors: two ports for Arm-side Gigabit Ethernet and two ports for FPGA-side EtherCAT. It also has four USB ports available. Since it is equipped with two 10/100/1000 PHYs on the FPGA side, it can also use Altera®'s TSE MAC IP, etc. QSPI or microSD cards can be used as boot memory, and the boot source can be selected with jumpers on the board. This board can be used in a variety of EtherCAT (hardware master/software master and slave) applications.Hardware Master: You can evaluate our hardware master using the Ethernet on the FPGA side.Software Master: You can implement various paid software masters using the Ethernet on the Arm side. We can also provide a demo environment with an open-source master stack implemented.Slave: It can also be used as a slave by implementing an EtherCAT slave IP, such

View Details Right arrow Right arrow
/

PIB

PIB is an intelligent development platform based on an Intel x86 i7 CPU and Cyclone V GT FPGA, designed for applications such as industrial control, vision optimization, and edge computing.

View Details Right arrow Right arrow
/

Starter Platform for OpenVINO™ Toolkit

Starter Platform for OpenVINO™ Toolkit is a PCIe based FPGA card with high performance and competitive cost. It's equipped with the largest Cyclone V GT（or GX）device at 301K LE and it supports PCIe Gen 2 x4(GX device will support PCIe Gen 1 x4). The board comes with 1GB DDR3, 64MB SDRAM, UART-to-USB interface, and extension headers such as GPIO and Arduino. This makes Starter Platform for OpenVINO™ Toolkit a re-configurable platform with adequate computing performance and low power consumption.

View Details Right arrow Right arrow
/

syn1588® PCIe NIC

Oregano Systems syn1588® PCIe NIC is a PCI Express Gbit network interface card with IEEE1588 hardware support. A PC equipped with the syn1588® PCIe NIC receives highly accurate time (<10 ns) independent from network utilization and CPU load without real-time requirements for the node’s operating system.

View Details Right arrow Right arrow
/

Terasic Cyclone® V SoC Development Kit with HSMC Connector (DE10-Standard)

The DE10-Standard Development Kit features an Altera SoC FPGA with dual-core ARM Cortex-A9 processors and programmable logic, delivering high performance, low power, and flexible reconfigurability for diverse design needs.

View Details Right arrow Right arrow
/

Terasic SoC System on Module Evaluation Kit

The Terasic SoC System on Module Evaluation Kit consists of the TSoM module and a TSoM-based board. The TSoM is a pocket-sized module powered by the latest Intel® Cyclone® V SoC FPGA. The board leverages the ARM dual-core Cortex-A9 CPU and 110K FPGA logic elements to deliver the lowest system cost and optimal power efficiency. The TSoM-based board expands the TSoM module with a variety of practical interfaces, enhancing overall equipment effectiveness (OEE) through IoT data and AI applications.

View Details Right arrow Right arrow
/

TSoM

TSoM is a pocket-sized module powered by the latest Intel Cyclone® V SoC FPGA. The board itself takes advantage of the ARM dual-core Cortex-A9 CPU and 110K FPGA Logic Elements to achieve lowest system cost and power efficiency. Armed with 1GB DDR3 memory for FPGA and HPS fabric respectively, and up to 8GB eMMC flash, the Cyclone V module ideally suited for building high bandwidth and large capacity memory system for a wide range of embedded applications.

View Details Right arrow Right arrow
/
Showing 10-18 of 19 Offerings