MAX® 10 FPGA Evaluation Kit

The MAX® 10 FPGA Evaluation Kit is intended as a "no frills", entry-level board for evaluation of the Intel® MAX 10 FPGA technology.

With this evaluation board, you can:

  • Develop designs for the 10M08S, 144-EQFP FPGA
  • Measure FPGA power (VCC_CORE and VCC_IO)
  • Bridge between different I/O voltages (adjustable VCC_IO on Bank 8)
  • Read and write to the FPGA’s NOR flash memory
  • Use the FPGA’s analog-to-digital converter embedded block to measure incoming analog signals
  • Interface to external functions or devices via Arduino UNO R3 connectors or through-hole vias
  • Reuse the kit’s PCB board and schematic as a model for your design

Ordering Information

Table 1. MAX 10 - 10M08 Evaluation Kit Ordering Code and Pricing Information

Ordering Code

Price

Ordering Information

EK-10M08E144

$49.95

Order online via the eStore or contact your local Intel® FPGA distributor to place your order.

** Does not include programming cable (order separately) **

Notes:

Buyer represents that it is a product developer, software developer or system integrator and acknowledges that this product is an evaluation kit that is not FCC authorized, is made available solely for evaluation and software development, and may not be resold.

Evaluation Kit Contents

The MAX 10 FPGA – 10M08 Evaluation Kit includes the following:

  • CE-compliant MAX 10 evaluation board
    • MAX 10 FPGA (10M08, single power supply, 144-pin EQFP)
    • Intel Enpirion® EP5388QI point-of-load, 800 mA, DC-DC step-down (buck) converter with an integrated inductor
    • JTAG header for download cable programming (POF) or configuration (SOF)
    • 50 MHz single-ended, external oscillator clock source
    • Shunt resistors and probe points to measure FPGA power
    • Switch, push buttons, jumpers, and status LEDs
    • Connectors:
      • Arduino headers to accept UNO R3 compatible Shields
      • General-purpose through-hole vias
      • Type mini-B USB connector (power source)
        • USB cable included
      • Footprint to install a potentiometer (customer must purchase and install)
  • Free Intel Quartus® Prime Lite Edition software (download and license from website)
  • Complete documentation
    • User manual, bill of materials, schematic, and board files

Back to Top

Figure 1. MAX 10 FPGA Evaluation Board

Figure 2. MAX 10 FPGA Evaluation Board Block Diagram

Documentation

Table 2. MAX 10 - 10M08 Evaluation Kit Documents Available

Document

Description

Version

User Guide

Information about the evaluation kit hardware.

1.1

Complete kit document installation
(Windows PC only)

(Updated) Full installation of all files, including the user manual, BOM, layout, PCB, schematics, and other documents or files.

14.0.2

(1)