Serial RapidIO to PCI Bridge Reference Design

from Jennic Ltd

The use of this design is governed by, and subject to, the terms and conditions of the Altera Hardware Reference Design License Agreement.

Overview

The Serial RapidIO® to PCI Bridge provides the capability to bridge between a Serial RapidIO interface and a PCI interface. It is part of a family of devices that are intended for applications which are currently based on legacy interface standards, such as PCI, but need to use a switched serial interconnect, such as Serial RapidIO.

The Serial RapidIO to PCI Bridge transparently converts PCI memory read and write transfers into RapidIO I/O or maintenance transactions. It appears as eight PCI windows, each of which can be mapped to different RapidIO destinations. Received RapidIO I/O transactions are converted to PCI memory accesses using an integrated DMA controller.

The bridge utilizes Jennic's RapidIO and PCI Interface intellectual property (IP) cores and the semiconductor vendor's on-chip SERDES/transceivers. Jennic's RapidIO IP core product line provides a range of complete, fully integrated RapidIO interface solutions to address a wide range of applications including endpoints and switches. These are based around a common, modular architecture and implement the physical, transport, and logical layer RapidIO standards and are suitable for implementation in a range of Altera® technologies including devices from the Stratix® and Stratix GX product families.

Features

  • Fully transparent bridge between
    • 1x/4x Serial RapidIO interface
    • 32-bit @ 66-MHz PCI (2.2) interface
  • RapidIO serial physical layer features
    • Operating rates of 1.25, 2.5, or 3.125 Gbaud per lane
    • Operates in either 1x or 4x mode
  • RapidIO transport and logical layer features
    • Supports the following RapidIO transactions
      • NREAD
      • NWRITE
      • NWRITE_R
      • SWRITE
      • RESPONSE
      • Maintenance
  • PCI Interface Features
    • 32-bit @ 66-MHz PCI (2.2) interface
    • PCI initiator and target functionality
    • Supports PCI configuration and memory read and write commands
    • Eight transparent 2-Mbyte PCI host windows
  • General
    • Verified against RapidIO Trade Association bus-functional models
    • Interoperability tested against third-party solutions
    • PCI/HIP evaluation platform available

Demonstrated Altera Technology

Block Diagram

Figure 1. Serial RapidIO to PCI Bridge Reference Design

fig1-serial-r-io-ref-design.gif

Contact Information

For additional information, please contact:

Jennic Ltd
Furnival St.
Sheffield
S1 4QT
UK
Phone: +44 (0) 114 281 2655
Fax: +44 (0) 114 281 2951
Email: info@jennic.com
URL: http://www.jennic.com

Reference Designs Disclaimer

These reference design illustrations remain the copyrighted property of Altera or its licensors and may be used within Altera Corporation devices only. They are being provided on an "as-is" basis and as an accommodation, and therefore all warranties, representations, or guarantees of any kind (whether express, implied, or statutory) including, without limitation, warranties of merchantability, non-infringement, or fitness for a particular purpose, are specifically disclaimed. Altera expressly does not recommend, suggest, or require that these examples be used in combination with any other product not provided by Altera.

Related Links