Wideband DDC Digital Down Converter

Block Diagram

Solution Type: IP Core

End Market: Broadcast, Military, Test & Measurement, Wireless, Wireline

Evaluation Method: OpenCore Plus

Technology: DSP: Error Detection and Correction

Arria Series: Arria 10, Arria V, Arria 10 SoC, Arria V SoC

Cyclone Series: Cyclone IV, Cyclone V, Cyclone V SoC

Stratix Series: Stratix IV, Stratix V


Supported Device Family: 

Solution Type: 


The Creonic Wideband Digital Down Converter (DDC) digitally converts the input signal at IF frequency down to baseband by multiplying input samples with sine/cosine waves generated by numerical controlled oscillators (NCO). Down converted samples are then decimated by a factor ranging from 2 to 2048 with multiplying step of 2. A CIC and 4 stages of half band filters are integrated within the decimator. The core accepts a real signal at input and provides complex I/Q baseband data at the output. The parallel architecture of the core allows for an input throughput up to 2.4 Gsps, data symbol rate up to 540 Msymb/s, making it a perfect fit for ultra high throughput applications such as wideband DVB-S2X communication.


    Device Utilization and Performance

    High input throughput of up to 2.4 Gsps Supported signal bandwidth of up to 600 MHz Tunable IF frequency from 10 to 700 MHz with a precision of at least 2 Hz Spurious-free dynamic range (SFDR) of at least 83 dB, filter’s passband ripple less than 0.05 dB

    Getting Started

    Contact us at sales@creonic.com if you need more information about our IP Cores

    IP Quality Metrics

    Year IP was first released2016
    Latest version of Quartus supported17.0
    Altera Customer Use
    IP has been successfully implemented in production with at least one customerY

    Customer deliverables include the following:

    • Design file (encrypted source code or post-synthesis netlist)
    • Simulation model for ModelSim Altera edition
    • Timing and/or layout constraints
    • Testbench or design example
    • Documentation with revision control
    • Readme file
    Any additional customer deliverables provided with IP
    Parameterization GUI allowing end user to configure IPN
    IP core is enabled for OpenCore Plus SupportY
    Source language
    Testbench languageVHDL
    Software drivers providedN
    Driver OS supportn/a
    User InterfaceAXI
    IP-XACT Metadata includedN
    Simulators supportedModelSim, RivieraPRO
    Hardware validated N. Altera Board Name NULL
    Industry standard compliance testing performed
    If No, is it planned?Y
    IP has undergone interoperability testing
    Interoperability reports available  N

    Design Solutions Network Members provide products and/or services that are sold or licensed by the Member and not Altera or its affiliates. Altera and its affiliates hereby disclaim any express or implied warranty of any kind including warranties of merchantability, noninfringement of intellectual property, or fitness for any particular purpose with respect to any such products and/or services.