DSPI_FIFO - Serial Peripheral Interface Master/Slave with FIFO

Block Diagram

Solution Type: IP Core

End Market: Automotive, Broadcast, Computer & Storage, Consumer, Industrial, Medical, Military, Test & Measurement, Wireless, Wireline

Evaluation Method: OpenCore, OpenCore Plus

Technology: Processors and Peripherals: Peripherals

Arria Series: Arria 10, Arria V, Arria 10 SoC, Arria V SoC

Cyclone Series: Cyclone IV, Cyclone V, Cyclone V SoC

MAX Series: MAX 10, MAX V

Stratix Series: Stratix IV, Stratix V

Overview

The DSPI_FIFO is a fully configurable SPI master/slave device, which allows you to configure polarity and phase of a serial clock signal SCK. It allows a microcontroller to communicate with serial peripheral devices, but also to communicate with an interprocessor in a multi-master system. A serial clock line (SCK) synchronizes shifting and sampling of the information on two independent serial data lines. The DSPI_FIFO data is simultaneously transmitted and received. What's more important, this is a technology independent design, that can be easily implemented in a variety of process technologies. The DSPI_FIFO system is flexible enough, to interface directly with numerous standard product peripherals, from several manufacturers. The system can be configured as a master or as a slave device, with data rates as high as CLK/4.

Features

    Device Utilization and Performance

    Provided in the product datasheet

    Getting Started

    For additional information, contact Digital Core Design at: Wroclawska 94 41-902 Bytom Poland Tel: +48 32 2828266 Fax: +48 32 2827437 E-mail: aleads@dcd.pl Website: http://www.digitalcoredesign.com

    IP Quality Metrics

    Basic
    Year IP was first released2004
    Latest version of Quartus supported15.1
    Altera Customer Use
    IP has been successfully implemented in production with at least one customerY
    Deliverables

    Customer deliverables include the following:

    • Design file (encrypted source code or post-synthesis netlist)
    • Simulation model for ModelSim Altera edition
    • Timing and/or layout constraints
    • Testbench or design example
    • Documentation with revision control
    • Readme file
    Y
    Any additional customer deliverables provided with IP
    TBD
    Parameterization GUI allowing end user to configure IPY
    IP core is enabled for OpenCore Plus SupportY
    Source language
    Verilog; VHDL
    Testbench languageVerilog; VHDL
    Software drivers providedY
    Driver OS supportTBD
    Implementation
    User InterfaceAXI; Avalon-MM
    IP-XACT Metadata includedN
    Verification
    Simulators supportedModelSim
    Hardware validated Y. Altera Board Name DE1, DE2
    Industry standard compliance testing performed
    N
    If No, is it planned?Y
    Interoperability
    IP has undergone interoperability testing
    N
    Interoperability reports available  N

    Design Solutions Network Members provide products and/or services that are sold or licensed by the Member and not Altera or its affiliates. Altera and its affiliates hereby disclaim any express or implied warranty of any kind including warranties of merchantability, noninfringement of intellectual property, or fitness for any particular purpose with respect to any such products and/or services.