DSPIS - Serial Peripheral Interface Slave

Block Diagram

Solution Type: IP Core

End Market: Automotive, Broadcast, Computer & Storage, Consumer, Industrial, Medical, Military, Test & Measurement, Wireless, Wireline

Evaluation Method: OpenCore, OpenCore Plus

Technology: Processors and Peripherals: Peripherals

Arria Series: Arria 10, Arria V, Arria 10 SoC, Arria V SoC

Cyclone Series: Cyclone IV, Cyclone V, Cyclone V SoC

MAX Series: MAX 10, MAX V

Stratix Series: Stratix IV, Stratix V

Overview

The DSPIS is a fully configurable SPI slave device, designated to operate with passive devices, like memories, LCD drivers etc. It allows you to configure polarity and phase of serial clock signal SCK. A serial clock line (SCK) synchronizes information shifting and sampling on the two independent serial data lines. Moreover, the data is simultaneously transmitted and received. The DSPIS system is flexible enough to interface directly with numerous standard product peripherals from several manufacturers. The clock control logic (CLK/4) allows a selection of clock polarity and a choice of two fundamentally different clocking protocols to accommodate most available synchronous serial peripheral devices. The DSPIS allows the SPI Master to communicate with passive devices.

Features

    Device Utilization and Performance

    Information provided in the product datasheet.

    Getting Started

    For additional information, contact Digital Core Design at: Wroclawska 94 41-902 Bytom Poland Tel: +48 32 2828266 Fax: +48 32 2827437 E-mail: aleads@dcd.pl Website: http://www.digitalcoredesign.com

    IP Quality Metrics

    Basic
    Year IP was first released2003
    Latest version of Quartus supported15.1
    Altera Customer Use
    IP has been successfully implemented in production with at least one customerY
    Deliverables

    Customer deliverables include the following:

    • Design file (encrypted source code or post-synthesis netlist)
    • Simulation model for ModelSim Altera edition
    • Timing and/or layout constraints
    • Testbench or design example
    • Documentation with revision control
    • Readme file
    Y
    Any additional customer deliverables provided with IP
    TBD
    Parameterization GUI allowing end user to configure IPY
    IP core is enabled for OpenCore Plus SupportY
    Source language
    Verilog; VHDL
    Testbench languageVerilog; VHDL
    Software drivers providedY
    Driver OS supportTBD
    Implementation
    User InterfaceAXI; Avalon-MM
    IP-XACT Metadata includedN
    Verification
    Simulators supportedModelSim
    Hardware validated Y. Altera Board Name DE1, DE2
    Industry standard compliance testing performed
    N
    If No, is it planned?Y
    Interoperability
    IP has undergone interoperability testing
    N
    Interoperability reports available  N

    Design Solutions Network Members provide products and/or services that are sold or licensed by the Member and not Altera or its affiliates. Altera and its affiliates hereby disclaim any express or implied warranty of any kind including warranties of merchantability, noninfringement of intellectual property, or fitness for any particular purpose with respect to any such products and/or services.