The Nios® II 3C25 Microprocessor with LCD Controller design example is a complete system-on-a-programmable-chip (SOPC) solution that incorporates a rich set of system peripherals and standard interfaces for a wide range of embedded applications involving flicker-free video processing and LCD touch panel control. This system consists of a Nios II processor, memories, video pipeline, LCD controller, and other peripherals.
This system is targeted to the Nios II Embedded Evaluation Kit, Cyclone® III Edition development kit. The system provides an interface to the hardware components on the board, such as DDR SDRAM, Synchronous SRAM, CFI Flash, SD card, LEDs, push button, DB9 RS-232 connector, Ethernet MAC/10/100 PHY, and the 800 x 240 pixel RGB LCD touch panel.
Downloading the Design Example
The use of this design is governed by, and subject to, the terms and conditions of the Altera® Hardware Reference Design License Agreement.
Download the files used in this design example.
The Nios II 3C25 Microprocessor with LCD Controller Data Sheet (PDF) provides the complete and detailed specifications on this system.
Design Examples Disclaimer
This design example may only be used within Altera devices and remains the property of Altera Corporation. It is being provided on an “as-is” basis and as an accommodation; therefore, all warranties, representations, or guarantees of any kind (whether express, implied, or statutory) including, without limitation, warranties of merchantability, non-infringement, or fitness for a particular purpose, are specifically disclaimed. Altera expressly does not recommend, suggest, or require that these examples be used in combination with any other product not provided by Altera.