|Operating System||Developed for Windows NT, 2000, and XP. You can customize the code to support other platforms.|
About the Software
The JRunner™ software driver is developed to configure Altera® SRAM-based programmable logic devices (PLDs) in JTAG mode for embedded configurations. You can customize the modular souce code's I/O control routines (provided as separate files) for your system. The JRunner driver supports the raw binary file (.rbf) format generated by the Altera Quartus® II software. The input file to the JRunner driver is in chain description file (.cdf) format. The JRunner software was developed and tested on the Windows NT, 2000, and XP platform. Note that JRunner cannot configure Altera MAX10 FPGA and Stratix 10 devices, you may refer to Altera Jam STAPL Software if you wish to implement embedded configuration to these devices in JTAG mode.
If you have a question or problem that is not answered by the information provided here, please contact Altera Applications at the mySupport web site.
Altera's Software Subscription License Agreement governs the installation and use of this software.