MAX+PLUS II Version 9.62 Update

System RequirementsUpdate Details
Support NotesLegal Notice
Update FilesInstallation Instructions

Download

Download MAX+PLUS II Version 9.62 Update
Operating SystemDownload File Size
Windows NT, Windows 98, Windows 95

Installation Instructions
962_pc.exe4.4 MB
UNIX Platform-Specific Files
Download appropriate platform-specific file(s) and the common files below

Installation Instructions
Solaris 2.5+ 962_solaris.tar.Z16.7 MB
HP-UX 10.2962_hp.tar.Z18.8 MB
AIX 4.1+962_rs6000.tar.Z17.3 MB
UNIX Common Files
Supports Solaris 2.5+, HP-UX 10.2, AIX 4.1+

Download both files.
962_common.tar.Z3.9 MB
962_max2lib.tar.Z3.2 KB

Back to top

System Requirements

Operating SystemWindows NT, Windows 98, Windows 95
Solaris 2.5+
HP-UX 10.2
AIX 4.1+
Software VersionMAX+PLUS® II 9.6 or 9.61
(Do not use this update with MAX+PLUS II BASELINE, E+MAXTM or ASAP2)

Back to top

Update Details

This update can only be used with the MAX+PLUS II software version 9.6 and 9.61. Do not use this update with any other version. You should download and install this update if you wish to add the following support to the MAX+PLUS II software version 9.6:

  • Full compilation, timing, and programming support for the following MAX® 7000B devices:
    • EPM7128BFC256
    • EPM7256BFC256
    • EPM7512BQC208
  • Advance pinout support for the following MAX 7000B and ACEXTM 1K devices:
    • EP1K10TC100
    • EP1K10TC144
    • EP1K10QC208
    • EP1K10FC256
    • EPM7032BUC49
    • EPM7064BUC49
  • Fix a problem where a peculiar clock skew value was reported
  • Fix a problem where a hold time of 2000 ns is reported
  • Fix a problem where running simulation immediately after compilation causes a screen failure and error messages
  • Fix an error while compiling a peripheral component interconnect (PCI) function
  • Fix a problem with EPM7512B compilation freezes
  • Fix a problem with 10K130E-2 tCO reporting
  • Fix a problem compiling 0 LC designs using the Quartus® Fitter
  • Fix a problem where the Quartus Fitter picked larger devices than the regular fitter
  • Fixes an error in lpm_or.tdf
  • Fix problem where simulator caused the MAX+PLUS II software to freeze
  • Fix a problem running compilation on an ACEX migration device in a different package
  • Fix an inconsistency in the report file (.rpt) and timing analysis report about the existence of fast input delay assignments
  • Fix a problem where software incorrectly reports "Can't use device ' ' to configure FLEX® 10K family devices"
  • Fix a problem where Row assignments are not honored in the Quartus Fitter
  • Add ACEX EP1K10 support
  • Get updated MAX 7000B, MAX 7000AE, and MAX 3000A timing models
  • Fix a problem where clique conflicts were not checked correctly
  • Fix a problem where the T-Guard could not be read intermittently
  • Fix an error in lpm_or.tdf version 3.0
  • Add programmer support for EP20K200EQC240 devices

Back to top

Software Update Files

The update contains the following files for PCs:

  • maxplus2.exe
  • max2win.exe
  • fit.dll
  • cmp.dll
  • mpp.dll
  • mux.dll
  • s2e.dll
  • f2p.dll
  • tpd.dll
  • vpr.dll
  • pgm.dll
  • ge.dll
  • sn.dll
  • svf.dll
  • pgdmpu6.drv
  • pgdhdlc.drv
  • pgdrdlc.drv
  • pgdsdlc.drv
  • pgdudlc.drv
  • partinfo.crf
  • package.dat
  • package2.dat
  • e576.pcf
  • e1000.pcf
  • e1500.pcf
  • m7128100.pcf
  • m7128120.pcf
  • e7128100.pcf
  • e7128120.pcf
  • s7128100.pcf
  • s7128120.pcf
  • a7128144.pcf
  • b7128144.pcf
  • m7256192.pcf
  • e7256192.pcf
  • s7256100.pcf
  • s7256144.pcf
  • s7256192.pcf
  • a7256256.pcf
  • b7256256.pcf
  • a7512256.pcf
  • b7512256.pcf
  • z576100.daf
  • z576144.daf
  • z576208.daf
  • z576256.daf
  • b7064049.daf
  • b7032044.ddf
  • b7064049.ddf
  • b7128049.ddf
  • e6657240.ddf
  • e6657356.ddf
  • e6657484.ddf
  • e6657600.ddf
  • e6657672.ddf
  • e576256.ddf
  • z576100.ddf
  • z576144.ddf
  • z576208.ddf
  • z577100.ddf
  • z577144.ddf
  • z577208.ddf
  • e577256.ddf
  • m7128b04.dmf
  • t6656e12.dmf
  • m7128z06.dmf
  • m7032b03.dmf
  • t6656e16.dmf
  • m7064b05.dmf
  • m7256b05.dmf
  • m7128b10.dmf
  • m7128b07.dmf
  • m7256b07.dmf
  • m7256b10.dmf
  • m7512b06.dmf
  • m7032z07.dmf
  • m7512b10.dmf
  • m7064b03.dmf
  • m7512b07.dmf
  • m7032b05.dmf
  • m7032b07.dmf
  • m7064b07.dmf
  • m7128z07.dmf
  • m7128z10.dmf
  • m7128z12.dmf
  • m7256z05.dmf
  • m7256z06.dmf
  • m7512z06.dmf
  • m7256z55.dmf
  • m7256z12.dmf
  • m7256z10.dmf
  • m7256z07.dmf
  • m7512z07.dmf
  • m7512z10.dmf
  • m7512z12.dmf
  • m7032z04.dmf
  • m7064z04.dmf
  • m7032z10.dmf
  • m7032z06.dmf
  • m7032z05.dmf
  • m7064z05.dmf
  • m7064z06.dmf
  • m7064z07.dmf
  • m7064z10.dmf
  • m7128z05.dmf
  • m3032z04.dmf
  • m3032z05.dmf
  • m3032z06.dmf
  • m3032z07.dmf
  • m3032z10.dmf
  • m3064z04.dmf
  • m3064z05.dmf
  • m3064z06.dmf
  • m3064z07.dmf
  • m3064z10.dmf
  • m3128z05.dmf
  • m3128z06.dmf
  • m3128z07.dmf
  • m3128z10.dmf
  • m3128z12.dmf
  • m3256z05.dmf
  • m3256z06.dmf
  • m3256z07.dmf
  • m3256z10.dmf
  • m3256z12.dmf
  • m3256z55.dmf
  • z57609.dmf
  • z57612.dmf
  • z57614.dmf
  • t576e.maf
  • jam2.jam
  • template.jam
  • tmplt_7e.jam
  • tmplt_7k.jam
  • tmplt_9k.jam
  • tmplt_c.jam
  • tmplt_f.jam
  • max2lib/mega_lpm/lpm_or.tdf
  • cpt.dll
  • lmgr326b.dll
  • add_dc.bat
  • add_dclr.exe
  • b7128256.ddf

The update contains the following common files for UNIX workstations:

  • partinfo.crf
  • package.dat
  • package2.dat
  • e576.pcf
  • e1000.pcf
  • e1500.pcf
  • m7128100.pcf
  • m7128120.pcf
  • e7128100.pcf
  • e7128120.pcf
  • s7128100.pcf
  • s7128120.pcf
  • a7128144.pcf
  • b7128144.pcf
  • m7256192.pcf
  • e7256192.pcf
  • s7256100.pcf
  • s7256144.pcf
  • s7256192.pcf
  • a7256256.pcf
  • b7256256.pcf
  • a7512256.pcf
  • b7512256.pcf
  • z576100.daf
  • z576144.daf
  • z576208.daf
  • z576256.daf
  • b7064049.daf
  • b7032044.ddf
  • b7064049.ddf
  • b7128049.ddf
  • e6657240.ddf
  • e6657356.ddf
  • e6657484.ddf
  • e6657600.ddf
  • e6657672.ddf
  • e576256.ddf
  • z576100.ddf
  • z576144.ddf
  • z576208.ddf
  • z577100.ddf
  • z577144.ddf
  • z577208.ddf
  • e577256.ddf
  • m7128b04.dmf
  • t6656e12.dmf
  • m7128z06.dmf
  • m7032b03.dmf
  • t6656e16.dmf
  • m7064b05.dmf
  • m7256b05.dmf
  • m7128b10.dmf
  • m7128b07.dmf
  • m7256b07.dmf
  • m7256b10.dmf
  • m7512b06.dmf
  • m7032z07.dmf
  • m7512b10.dmf
  • m7064b03.dmf
  • m7512b07.dmf
  • m7032b05.dmf
  • m7032b07.dmf
  • m7064b07.dmf
  • m7128z07.dmf
  • m7128z10.dmf
  • m7128z12.dmf
  • m7256z05.dmf
  • m7256z06.dmf
  • m7512z06.dmf
  • m7256z55.dmf
  • m7256z12.dmf
  • m7256z10.dmf
  • m7256z07.dmf
  • m7512z07.dmf
  • m7512z10.dmf
  • m7512z12.dmf
  • m7032z04.dmf
  • m7064z04.dmf
  • m7032z10.dmf
  • m7032z06.dmf
  • m7032z05.dmf
  • m7064z05.dmf
  • m7064z06.dmf
  • m7064z07.dmf
  • m7064z10.dmf
  • m7128z05.dmf
  • m3032z04.dmf
  • m3032z05.dmf
  • m3032z06.dmf
  • m3032z07.dmf
  • m3032z10.dmf
  • m3064z04.dmf
  • m3064z05.dmf
  • m3064z06.dmf
  • m3064z07.dmf
  • m3064z10.dmf
  • m3128z05.dmf
  • m3128z06.dmf
  • m3128z07.dmf
  • m3128z10.dmf
  • m3128z12.dmf
  • m3256z05.dmf
  • m3256z06.dmf
  • m3256z07.dmf
  • m3256z10.dmf
  • m3256z12.dmf
  • m3256z55.dmf
  • z57609.dmf
  • z57612.dmf
  • z57614.dmf
  • t576e.maf
  • jam2.jam
  • template.jam
  • tmplt_7e.jam
  • tmplt_7k.jam
  • tmplt_9k.jam
  • tmplt_c.jam
  • tmplt_f.jam
  • max2lib/mega_lpm/lpm_or.tdf
  • add_dc.sh
  • add_dclr.awk

The update contains the following files for Solaris workstations:

  • max2win
  • maxplus2

The update contains the following files for HP workstations:

  • max2win
  • maxplus2

Back to top

Support

If you have a question or problem that is not answered by the information provided here or in MAX+PLUS II Help, please inquire in the mySupport web site.

Back to top

Legal Notice

Altera's Software Subscription License Agreement governs installation and use of this software.