Article ID: 000079931 Content Type: Troubleshooting Last Reviewed: 04/13/2023

Where can I find the "Enable ERAM Preload" option for Intel® MAX® 10 devices in the Quartus® II software version 14.1 and later?

Environment

  • Quartus® II Software
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    The "Enable ERAM Preload" option for Intel® MAX® 10 devices can be located in the Device options in the Quartus® II software version 14.1 and later.

     

    Resolution

    In the Quartus II software, go to Assignments -> Device -> Device and Pin Options -> Configuration -> Configuration Mode to choose from the following options :

    • Dual Compressed Images
    • Single Uncompressed Image
    • Single Uncompressed Image with ERAM Preload
    • Single Compressed Image with ERAM Preload
    • Single Compressed Image


    Options 3 or 4 enable the ERAM Preload feature.

     

    Related Products

    This article applies to 1 products

    Intel® MAX® 10 FPGAs