Article ID: 000087037 Content Type: Troubleshooting Last Reviewed: 08/18/2014

Pausing target processor: not responding.

Environment

  • Quartus® II Subscription Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the Quartus® II software version 13.0, you may see the error message below when trying to connect the Nios® II debugger or run nios2-download.

    Using cable "USB-BlasterII [1-1.1]", device 1, instance 0x00
    Pausing target processor: not responding.
    Resetting and trying again: FAILED
    Leaving target processor paused

    Resolution This problem has been fixed beginning with the Quartus II software version 13.1.

    Related Products

    This article applies to 1 products

    Intel® Programmable Devices