Article ID: 000075980 Content Type: Troubleshooting Last Reviewed: 05/13/2014

What input file should be used to program a Serial Configuration Device (EPCS)?

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description If you are using the Quartus®II Programmer, the input file must be a Serial Configuration Device Programmer Object File (POF). If you are using an embedded programmer, such as SRunner, you can use the Raw Programming Data File (RPD) as the input file to program the Serial Configuration Device. The RPD file contains only device-specific binary programming data.

Related Products

This article applies to 1 products

Cyclone® FPGAs