Article ID: 000075565 Content Type: Troubleshooting Last Reviewed: 01/29/2018

Why does the Intel® Arria® 10 and Intel Cyclone® 10 PCI* Express Gen1 and Gen2 PIPE PHY fail to link train correctly?

Environment

  • Intel® Quartus® Prime Pro Edition
  • Intel® Arria® 10 Cyclone® 10 Hard IP for PCI Express
    • BUILT IN - ARTICLE INTRO SECOND COMPONENT

    Critical Issue

    Description

    Due to a problem with the Intel® Quartus® Prime version 17.1 and earlier transceiver calibration code, Intel Arria® 10 and Intel Cyclone® 10 PCIe* PIPE PHYs configured for Gen1 and Gen2 configurations may fail to link train correctly and reach the L0 state.

    Resolution

    This problem has been fixed starting in Intel Quartus Prime v17.1.1. 

     

    Related Products

    This article applies to 4 products

    Intel® Arria® 10 GX FPGA
    Intel® Cyclone® 10 FPGAs
    Intel® Arria® 10 GT FPGA
    Intel® Arria® 10 SX SoC FPGA

    Need more help?

    Contact support

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.