.webp){kind=small}
The Creonic DVB-S2X decoder is a silicon-proven, scalable solution that allows for symbol rates of up to 100 MSymbols/s on state-of-the-art FPGAs. DVB-S2X is the next generation satellite transmission standard which is an extended version of its well-established predecessor DVB-S2. The new specification allows for spectral efficiency gains of up to 50% by offering lower roll-off factors, higher modulations and a finer code rate granularity compared to DVB-S2.
Creonic GmbH
Key Features
- Compliant with DVB-S2 and DVB-S2X
- Support for decoding of BBFRAMEs
- Support for ACM, CCM, and VCM
- Support for very low SNR modes (VLSNR) with SNRs below -9 dB
- Support for short, medium, and normal frames (16,200 bits, 32,400 and 64,800 bits)
- Support for BPSK, QPSK, 8-PSK, 16-APSK, 32-APSK, 64-APSK, 128-APSK, and 256-APSK
Offering Brief
Offering Brief
| Device Family | Agilex® 3 FPGA C-Series, Agilex® 5 FPGA D-Series, Agilex® 5 FPGA E-Series, Agilex® 7 FPGA F-Series, Agilex® 7 FPGA I-Series, Agilex® 7 FPGA M-Series, Agilex® 9 FPGA Direct RF-Series, Arria® 10 GT FPGA, Arria® 10 GX FPGA, Arria® 10 SX FPGA, Arria® V GT FPGA, Arria® V GX FPGA, Arria® V GZ FPGA, Arria® V ST FPGA, Arria® V SX FPGA, Cyclone® 10 GX FPGA, Cyclone® 10 LP FPGA, Cyclone® V E FPGA, Cyclone® V GT FPGA, Cyclone® V GX FPGA, MAX® 10 FPGA, MAX® V CPLD, Stratix® 10 AX FPGA, Stratix® 10 DX FPGA, Stratix® 10 GX FPGA, Stratix® 10 SX FPGA, Stratix® 10 TX FPGA, Stratix® III FPGA, Stratix® IV E FPGA, Stratix® IV GX FPGA, Stratix® V GS FPGA, Stratix® V GX FPGA |
|---|---|
| Offering Status | Production |
| Integrated Testbench | Yes |
| Latest Quartus Version Supported | 22.4.0 |
| Development Language | C/C++, Verilog, VHDL |
Deliverable includes Verilog source code or synthesized netlist, VHDL testbench, and bit-accurate Matlab, C or C++ simulation model
Ordering Information
Creonic DVB-S2X LDPC / BCH Decoder
from Direct
