.webp){kind=small}
DCD believes that even though something may be small or slow, it can still offer maximal efficiency and ultimate reliability. That’s why our DLIN controller with UART half-duplex enhanced functionality supports transmission speeds between 1kb/s and 20kb/s, which allows us to transmit and receive LIN messages compatible to: LIN 1.3, LIN 2.1 and the newest LIN 2.2A This interface is a serial communication protocol, primarily designed to be used in automotive applications. Compared to the CAN, The LIN is slower, but thanks to its simplicity, it is much more cost-effective. Our Core is ideal for communication in intelligent sensors and actuators, where the bandwidth and versatility of the CAN is not required. The DLIN core provides an interface between a microprocessor/microcontroller and a LIN bus. It can work as a master or slave LIN node, depending on a work mode determined by the microprocessor/microcontroller. The reported information status includes the type...
DCD-SEMI
DCD believes that even though something may be small or slow, it can still offer maximal efficiency and ultimate reliability. That’s why our DLIN controller with UART half-duplex enhanced functionality supports transmission speeds between 1kb/s and 20kb/s, which allows us to transmit and receive LIN messages compatible to: LIN 1.3, LIN 2.1 and the newest LIN 2.2A This interface is a serial communication protocol, primarily designed to be used in automotive applications. Compared to the CAN, The LIN is slower, but thanks to its simplicity, it is much more cost-effective. Our Core is ideal for communication in intelligent sensors and actuators, where the bandwidth and versatility of the CAN is not required. The DLIN core provides an interface between a microprocessor/microcontroller and a LIN bus. It can work as a master or slave LIN node, depending on a work mode determined by the microprocessor/microcontroller. The reported information status includes the type and condition of transfer operations performed by the DLIN, as well as a wide range of LIN error conditions (overrun, framing, parity, timeout). Our Core includes a programmable timer that allows for detecting timeout and synchronization errors. The DLIN is described at the RTL level, empowering the target use in FPGA and ASIC technologies.
The IP core is available in two versions – Basic and Safety-Enhanced.
This sophisticated solution’s been developed as ISO26262-10 Safety Element out of Context. It can optionally be improved by necessary safety mechanisms and provide detailed safety documentation: all ISO26262 soft IP SEooC required work products, which include complete Failure Modes Effects and Detection Analysis FMEDA analysis with step-by-step instruction to help to integrate the IP into the customer’s system and to conduct the system-level safety analysis. All the safety-related work products were checked by a third-party, independent audit.
Key Features
- Available in two versions – Basic and Safety-Enhanced
- Conforms with LIN 1.3, LIN 2.1 and LIN 2.2A specification
- UART half-duplex functionality (available only in basic version)
- Automatic LIN Header handling
- Automatic Re-synchronization
- Data rate between 1Kbit/s and 20 Kbit/s
- Master and Slave work mode
- Time-out detection
- Extended error detection
- “Break-in-data” support
Offering Brief
Offering Brief
| Device Family | Agilex® 3 FPGA C-Series, Agilex® 5 FPGA D-Series, Agilex® 5 FPGA E-Series, Agilex® 7 FPGA F-Series, Agilex® 7 FPGA I-Series, Agilex® 7 FPGA M-Series, Agilex® 9 FPGA Direct RF-Series, Arria® 10 GT FPGA, Arria® 10 GX FPGA, Arria® 10 SX FPGA, Arria® V GT FPGA, Arria® V GX FPGA, Arria® V GZ FPGA, Arria® V ST FPGA, Arria® V SX FPGA, Cyclone® 10 GX FPGA, Cyclone® 10 LP FPGA, Cyclone® III FPGA, Cyclone® IV E FPGA, Cyclone® IV GX FPGA, Cyclone® V E FPGA, Cyclone® V GT FPGA, Cyclone® V GX FPGA, Cyclone® V SE FPGA, Cyclone® V ST FPGA, Cyclone® V SX FPGA, MAX® 10 FPGA, MAX® V CPLD, Stratix® 10 AX FPGA, Stratix® 10 DX FPGA, Stratix® 10 GX FPGA, Stratix® 10 SX FPGA, Stratix® 10 TX FPGA, Stratix® III FPGA, Stratix® IV E FPGA, Stratix® IV GX FPGA, Stratix® V GS FPGA, Stratix® V GX FPGA |
|---|---|
| Offering Status | Production |
| Integrated Testbench | Yes |
| Evaluation License | Yes |
| Design Examples Available | Yes |
| Latest Quartus Version Supported | 25.1.1 |
| Development Language | Encrypted Verilog, Verilog |
HDL Source Code
Testbench environment - automatic simulation macros, tests with reference responses
Synthesis scripts
Technical documentation
12 months of technical support
Ordering Information
DLIN
from Direct
Documentation & Resources
Market Segment and Sub-Segments
Aerospace
View Sub-Segments
Consumer
View Sub-Segments.svg?h=0&v=8a74a614-b7ba-4604-ad78-f0827c6a3874&itok=rVWXlOCO)
Defense
View Sub-Segments
Government
View Sub-Segments
Industrial
View Sub-Segments
Medical
View Sub-SegmentsMedical
Imaging
Lab/Life Sciences
Non-Imaging Patient Devices
Other Medical
Ultrasound
Transportation
View Sub-SegmentsTransportation
Automotive (Passenger Vehicles)
Charging Infrastructure
Non-Automotive Transportation
Transportation Infrastructure (non-charging)