.webp){kind=small}
Resources for EDA tools supported in the Quartus® Prime Software.
The Quartus® Prime Edition Software supports interfaces with third-party EDA tools throughout the design flow. For more information about FPGA EDA partnerships, refer to the EDA Partners page.
For documentation and training on EDA tool support in the Quartus® Prime Edition Software, refer to the appropriate resource center:
- I/O Management and Board Development Support Center
- Synthesis and Netlist Viewers Resource Center
- Questa*-Altera® FPGA Edition Quick-Start: Quartus® Prime Pro Edition
- ModelSim* - Altera® FPGA Edition Simulation Quick-Start: Quartus® Prime Pro Edition
For additional information on using EDA tools with the Quartus Prime or Quartus II software, refer to the following topics from Help:
- Quartus® Prime Pro Edition Software Interface
- Using Quartus Prime Software with Other EDA Tools
- Specifying EDA Tool Settings
- Creating and Instantiating Quartus® Prime IP Cores in Other EDA Tools
- Board-Level Tools
- BSDL (Boundary-Scan Description Language)
- Board-level Signal Integrity Analysis
- Mentor Graphics® TAU (Timing Analysis)
- Simulation Model Support
- Synthesis Tools
- Mentor Graphics Precision RTL Synthesis
- Mentor Graphics DK Design Suite
- Synopsys® Synplify Software with the Quartus® Prime Software
- Simulation Tools
- Supported Simulation Tools
- Formal Verification Tools
- Cadence Incisive Conformal
- Physical Synthesis Tools
- Mentor Graphics Precision Synthesis