banner

Find Offerings

Switch to Partners

By Source
Offering Types
Region
Device Family
Market Segments
Program Level
Sort by
SRAM
By Source
Offering Types
Region
Device Family
Market Segments
Program Level
Sort by

100G UDP IP Stack

Logic Fruit’s 100G UDP IP Stack – Optimized for high-speed 100G data transfer with minimal CPU dependency. Fully supports ARP and ICMP for reliable network connectivity and easy integration into SoC designs

10GBASE-R PHY FPGA IP

The 10GBASE-R PHY FPGA Intellectual Property (IP) core can be used with either Altera FPGA IP for 10G Ethernet MAC or with a customer-developed Ethernet MAC via a standard XGMII interface running at 156.25 Mbps.

ApSRAM Controller (will not be supported for FPGA devices, can be used during SoC Protyping in FPGA)

ApSRAM Controller is a low-latency, low-power IP scalable from 64Mb to 1Gb with multi-bank architecture for high throughput. Designed for AI/ML, edge, automotive, and IoT systems, it supports AXI interface and various silicon technologies. It simplifies SRAM replacement while ensuring compliance and interoperability.

ARINC 429 IP Core

Logic Fruit's ARINC 429 IP Core is a multichannel module with support for virtually any number of transmitters and Receivers. Both low speed (12.5 Kbps) and high speed (100 Kbps) data rates are supported for data transmission, along with other configurable data rates from 12.5 Kbps to 1 Mbps.

ARINC 818 IP CORE

ARINC 818 (ADVB) is a high data rate video bus based on the ANSI Fiber Channel Audio-Video (FC-AV) protocol standards. Emphasizing cost reduction as well as speeding up the link initialization. ARINC 818 is a unidirectional interface that was developed for avionics systems, such as connecting mission processors to cockpit displays like HUDS, MFDs, PFDs, or HMDs. Used widely in Boeing 787 and the KC46A tanker, Airbus A350 and A400M, the COMAC C-919, the C-17, F15, F18 and various military aircrafts.

Offerings Image

Current: xSPI Initiator core.  

xSPI Memory Controller Core for PSRAM, NOR Flash, STT-MRAM. Protocols: (a) JEDEC xSPI Profile 1.0, 2.0; (b) HyperBus 1.0, 2.0, 3.0; (c) OctaBus; (d) Octal Bus; (e) Exccela Bus. SLL support x8 and x16 PSRAM devices, and support chaining two x16 PSRAM devices to create x32 PSRAM channel.

CXL 3 CONTROLLER IP

The CXL 3 Controller IP is forward compatible with CXL 3.x and backward compatible with previous versions, offering flexible configurations needed for advanced systems. It supports multiple channels and configurable CXL degraded modes, ensuring seamless integration with CXL devices and enabling high-performance data transfer. Ideal for versatile system designs, it accommodates all three CXL device types to facilitate efficient connectivity and scalable architecture.

DDR5/4 and LPDDR3/2 Controller (Silicon Proven IP for Altera Devices)

Mobiveil’s UMMC supports DDR5/4/3, LPDDR3/2, RLDRAM2/3, and 3DS memory interfaces for mobile, consumer, and networking applications. It provides high-bandwidth, low-power access with dynamic power management and high-frequency operation. The controller supports rapid debug and seamless SoC integration.

DISPLAY PORT IPs

Logic Fruit's Display Port Transmitter & Receiver IP Cores support multiple line rates up to 8.1 Gbps. The IP cores have been developed as per Display Port specifications DP2.0/eDP1.5.