banner

Find Offerings

Switch to Partners

By Source
Offering Types
Region
Device Family
Market Segments
Program Level
Sort by

Loading

Flash
By Source
Offering Types
Region
Device Family
Market Segments
Program Level
Sort by

10GBASE-R PHY FPGA IP

The 10GBASE-R PHY FPGA Intellectual Property (IP) core can be used with either Altera FPGA IP for 10G Ethernet MAC or with a customer-developed Ethernet MAC via a standard XGMII interface running at 156.25 Mbps.

Enterprise Flash Controller - ONFI/Toggle (Silicon Proven IP for Altera Devices)

Mobiveil’s ONFI/Toggle NAND Controller is designed for enterprise SSDs, supporting ONFI 5.2 and Toggle NAND protocols. It enables high-speed multi-page data transactions with optional LDPC support for enhanced reliability. Its flexible addressing and pipeline performance make it ideal for next-gen flash systems.

FFT FPGA IP Cores

The Fast Fourier transform (FFT) FPGA intellectual property (IP) core is a high-performance, highly parameterizable FFT processor.

HyperBus Controller (Silicon Proven IP for Altera Devices)

Mobiveil’s HyperBus Controller enables high-speed (up to 333 MB/s) flash access over a 12-pin interface, surpassing legacy SPI/QSPI protocols. It supports AXI interface, 0-wait-state writes, continuous burst reads, and XiP execution. Ideal for HyperFlash/HyperRAM integration, it maximizes throughput and performance in constrained systems.

HyperRAM Controller (Silicon Proven IP for Altera Devices)

The HyperRAM Controller supports Winbond’s HyperBus-based HyperRAM devices used in IoT, automotive, and industrial SoCs. Written in tech-agnostic Verilog RTL, it supports major simulation and synthesis tools. The controller ensures seamless memory integration with minimal resource usage.

Offerings Image

IntelliProp SATA AHCI Host Core (IPC-SA156A-HI)

IntelliProp SATA AHCI Host Core (IPC-SA156A-HI) is a highly reliable, silicon-proven Intellectual Property (IP) solution providing standard 6 Gb/s Serial-ATA (SATA 3.3) host connectivity. Optimized for Altera FPGAs, it enables rapid deployment of cost-effective, high-throughput storage solutions compliant with the widely supported AHCI register specification.

IPM-BCH

For design that uses shorter packets and codes, a subset of our prevalidated and improved IPM-BCH is available to protect your private datas.

IPM-SSD

This architecture proposal is based on NVMe and NAND Flash Controller offloaded IPs. It is integrated in a FPGA and could be also be integrated in ASIC, allowing to provide design flexibility and the ability to add processing accelerator IPs, computational storage…. IPM-SSD solution is the perfect base to create your own PCIe NVMe SSD.

IPM-UNFC

NAND Flash controller up to ONFI 5.x compliant with an embedded hardware ECC (either IPM-BCH or IPM-LDPC)