banner

Find Offerings

Switch to Partners

By Source
Offering Types
Region
Device Family
Market Segments
Program Level
Sort by
By Source
Offering Types
Region
Device Family
Market Segments
Program Level
Sort by

IntelliProp NVMe Host Accelerator IP Core (IPC-NV164-HI)

The IntelliProp NVMe Host Accelerator IP Core (IPC-NV164-HI) is the dedicated hardware solution for achieving the industry's lowest latency and highest throughput NVMe data transfers on Intel FPGAs, including the high-performance Agilex™ and Arria® 10 families.This comprehensive IP core acts as an intelligent host-side controller, featuring an optimized, multi-channel Direct Memory Access (DMA) engine. It completely offloads the complex NVMe protocol command and data stack from the host CPU or FPGA logic fabric, freeing up critical resources for your primary acceleration workload.By eliminating software overhead and leveraging optimized hardware, the IPC-NV164-HI ensures deterministic, low-latency access to NVMe Solid-State Drives (SSDs). This core is essential for building cutting-edge Computational Storage, HPC, and Data Center Acceleration solutions where speed and efficiency are non-negotiable.

IntelliProp NVMe-to-NVMe Bridge (IPC-NV171A-BR)

IntelliProp's industry-leading NVMe Bridge Platform provides transparent, ultra-low-latency, in-line data acceleration on Intel FPGAs (including Agilex™ 7, Arria® 10) and other devices with PCIe Hard IP blocks.This unique IP core functions as a non-disruptive NVMe-to-NVMe Protocol Bridge (a "bump in the wire") placed directly between the Host CPU and the NVMe SSD. The architecture combines an NVMe Target Core and an NVMe Host Accelerator Core to create a dedicated "Sandbox" area for custom user logic.Leveraging full Store and Forward data buffering, the platform enables the creation of Computational Storage Drives (CSD) and powerful in-line data processing. This allows you to insert proprietary, hardware-accelerated functions—such as Data Encryption (AES), Compression/Deduplication, or RAID—directly into the high-speed NVMe data path without any host software overhead.

Offerings Image

IntelliProp SATA AHCI Host Core (IPC-SA156A-HI)

IntelliProp SATA AHCI Host Core (IPC-SA156A-HI) is a highly reliable, silicon-proven Intellectual Property (IP) solution providing standard 6 Gb/s Serial-ATA (SATA 3.3) host connectivity. Optimized for Altera FPGAs, it enables rapid deployment of cost-effective, high-throughput storage solutions compliant with the widely supported AHCI register specification.

Interlaken IP

Interlaken is an interconnect protocol for high-speed, channelized chip-to-chip interface in networking applications. It is optimized for high-bandwidth chip-to-chip packet transfers at rates from 10 Gbps to 600 Gbps and beyond.

Offerings Image

IO Checker

FPGA pin-out to board co-design and verification

Offerings Image

IP Core Design and Development

IP Core Development & Customization

IP-CamLink Camera Link IP

A Camera Link processing core capable of interfacing with base, medium, full, and extended configuration cameras. The core provides link alignment between up to 3 Channel Link channels.

IPAC-1000 PCIe Programmable Acceleration Card 

IPAC-1000 is a PCIe standard programmable acceleration card with an Altera Agilex-7 M series FPGA. It comes in full height, 3/4 length, dual slot and it fully conforms to the PCIe card standard.

IPMX Core

Nextera-Adeas' industry-leading IPMX FPGA IP cores contain everything needed to IPMX-Enable your new or existing products quickly and easily. A full IPMX Certified reference/demo design project is provided along with all of the drivers, daemons, system control software, and a Web GUI so customers can start with a working system and customize to their needs. Design services are also available to help accelerate time to market.