banner

Find Offerings

Switch to Partners

By Source
Offering Types
Region
Device Family
Market Segments
Program Level
Sort by

Loading

By Source
Offering Types
Region
Device Family
Market Segments
Program Level
Sort by

H16750S: UART with FIFOs, IrDA and Synchronous CPU Interface

The H16750S is a standard UART providing 100% software compatibility with the popular Texas Instruments 16750 device. It performs serial-to-parallel conversion on data originating from modems or other serial devices, and performs parallel-to-serial conversion on data from a CPU to these devices. The H16750S can be run in either 16450-compatible character mode or FIFO mode, where an internal FIFO relieves the CPU of excessive software overhead. An IrDA-compliant serial data port may be used for infrared communication. Developed for easy reuse in FPGA or ASIC applications, the H16750S is available optimized for several technologies with competitive utilization and performance characteristics

H264 Video Decoder

H264 / HAVC Video Decoder Core HD and 4k60 Version Fabric only single core solution Capable of high bitrate decoding Low-Latency Decoding

H264 Video Encoder

H264 Video Encoder Core Fabric only IP core HD, 4k, 8k, progressive and interlaced support

H264-E-BPF - Ultra-fast, AVC/H.264 Baseline Profile Encoder

The H264-E-BPF IP core is a video encoder supporting the Constrained Baseline Profile of the ISO/IEC 14496-10/ITU-T H.264 standard. The H264-E-BPF encoder requires less silicon area than most equally capable hardware H.264 encoders—approximately 250K gates—allowing for very cost-effective implementations. Its small silicon footprint, low external memory bandwidth requirements, and zero software overhead enable high-throughput H.264 coding at an extremely low energy cost.

H265 Video Decoder

HD and 4k60 Version Fabric only single core solution Capable of high bitrate decoding Low-Latency Decoding

H265 Video Encoder

H264 Video Encoder Core Fabric only IP core HD, 4k, 8k, progressive and interlaced support Lower bitrate and higher quality compared to H264

HAN Pilot Platform

Terasic’s HAN Pilot Platform is a high-performance flagship development kit based on Intel Arria 10 SoC FPGAs. With the goal of “being the pilot platform for HPC, Automotive, and Networking applications (HAN),” the board is purpose built for performance-demanding industrial embedded applications.

HawkEye-20GigE: 20 GigE Vision Frame Grabber & Image Processing\Smart NIC

HawkEye-20GigE Vision Dual-Port 10 GigE Frame Grabbing & Image Processing System\Smart NIC. The HawkEye-20 GigE Frame Grabber is ideal for high performance, high-bandwidth applications based on multiple cameras and/or ultra-high bandwidth cameras.  The HawkEye-20GigE's real-time FPGA processing ensures zero frame loss and virtually zero CPU utilization, freeing the CPU for key processing tasks. 

HawkEye-CL: Camera Link Frame Grabber & Image Processing

The HawkEye-CL Frame Grabber is Camera Link Rev. 2.0 compliant, offering a number of options, from plug-and-play grabbers to a full system solution that includes acquisition and on-FPGA processing. The card is supported by off-the-shelf modular building blocks for embedding in the acquisition pipeline, including HDR, white balance, gamma correction, compression (JPG, lossless, Quality+), and more. It is also supported by Gidel's InfiniVision acquisition architecture, optimized for grabbing from 100+ cameras.