Transceiver PHY IP Support Center

The Transceiver PHY IP Support Center provides information on how to select, design, and implement Transceiver PHY IP links.

Getting Started 1. Device and IP Selection 2. Design Flow and IP Integration 3. Board Design and Power Management 4. Interoperability and Standards Testing 5. Design Examples and Reference Designs 6. Training Courses and Videos 7. Debug

The Transceiver PHY IP support center provides information on how to select, design, and implement transceiver links for Agilex™ 7, Agilex™ 5, Agilex™ 3, Stratix® 10, Arria® 10, and Cyclone® 10 devices. There are also guidelines on how to bring up your system and debug the transceiver links. This page is organized into categories that align with a high-speed transceiver system design flow from start to finish.

Get additional support for Agilex™ 7 FPGA Interface Protocol Design, Agilex™ 5 FPGA Interface Protocol Design, and Agilex™ 3 FPGA Interface Protocol Design step-by-step guided journeys for standard development flows surfacing the key critical resources and documentation.

For other devices, search the Device and Product Support Collections.

Getting Started

1. Device and IP Selection

Which FPGA Device Family Should I Use?

Table 1 - Device Variant Maximum Transceiver Data Rate and Channel Count Feature Support
Device		Agilex™ 7	Agilex™ 5			Agilex™ 3	Stratix® 10			Arria® 10			Cyclone® 10
Device Variant		F-Series E-Tile	D-Series	E-Series (Group A)	E-Series (Group B)	C-Series	GX/SX L-Tile	GX/SX H-Tile	MX/TX E-Tile	SX^{3, 5}	GX^{3, 5}	GT⁴	GX
Maximum Data Rate (Chip-to-Chip)^{1, 6}	GX Channels	-	-	-	-	-	-	17.4 Gbps	-	17.4 Gbps	17.4 Gbps	17.4 Gbps	12.5 Gbps
	GXT Channels	-	-	-	-	-	26.6 Gbps	28.3 Gbps	28.3 Gbps	-	-	25.8 Gbps	-
	GXE Channels	28.9 Gbps (NRZ) 57.8 Gbps (PAM4)	-	-	-	-	-	-	28.9 Gbps (NRZ) 57.8 Gbps (PAM4)	-	-	-	-
	GTS Channels	-	28.1 Gbps	28.1 Gbps	17.16 Gbps	12.5 Gbps	-	-	-	-	-	-	-
Maximum Data Rate (Backplane)⁷	GX Channels	-	-	-	-	-	12.5 Gbps	28.3 Gbps	28.3 Gbps	12.5 Gbps	12.5 Gbps	12.5 Gbps	6.6Gbps
	GXT Channels	-	-	-	-	-	12.5 Gbps	28.3 Gbps	28.3 Gbps	-	12.5 Gbps	12.5 Gbps	-
	GXE Channels	28.9 Gbps (NRZ) 57.8 Gbps (PAM4)	-	-	-	-	-	-	28.9 Gbps (NRZ) 57.8 Gbps (PAM4)	-	-	-	-
	GTS Channels	-	28.1 Gbps	28.1 Gbps	17.16 Gbps	12.5 Gbps	-	-	-	-	-	-	-
Maximum Channels per device	GX Channels	-	-	-	-	-	96	96	-	96	72	72	12
	GXT Channels	-	-	-	-	-	32	64	24	-	6	6	-
	GXE Channels	24 (and 32 P-Tile)	-	-	-	-	-	-	120	-	-	-	-
	GTS Channels	-	32	24	24	4	-	-	-	-	-	-	-
Notes: The values shown in the table above are for standard power modes. In reduced power mode, the maximum data rate for Arria® 10 GX device channels (chip-to-chip) is 11.3 Gbps. As the GT transceiver channels are designed for peak performance, they do not have a reduced power mode of operation. To operate GX transceiver channels at designated data rates in standard and reduced power modes, apply the corresponding core and periphery power supplies. For more details, refer to the Arria® 10 Device Datasheet. Arria® 10 and Stratix® 10 device transceivers can support data rates below 1.0 Gbps through over sampling. For SX and GX device variants, the maximum transceiver data rates are specified for the fastest (–1) transceiver speed grade. Refer to the Device Datasheet for lower speed grade specifications. For GT device variants, the maximum transceiver data rates are specified for (-1) transceiver speed grade. Refer to the Device Datasheet for the lower speed grade specifications. Stratix® 10 device transceivers have both GX and GXT types of transceiver channels. For details, refer to the Stratix® 10 L-/H-Tile Transceiver PHY User Guide. Arria® 10 and Stratix® 10 device transceivers can support data rates below 1.0 Gbps through over sampling. Backplane applications refer to the ones that require advanced equalization, such as decision feedback equalization (DFE) enabled to compensate for channel loss.

Table 2 - Interface Hard IP Device Variant and Feature Support
Device	Agilex™ 7	Agilex™ 5			Agilex™ 3	Stratix® 10			Arria® 10			Cyclone® 10
Device Variant	F-Series E-Tile	D-Series	E-Series (Group A)	E-Series (Group B)	C-Series	GX/SX L-Tile	GX/SX H-Tile	MX/TX E-Tile	SX	GX	GT	GX
PCIe Hard IP	One PCIe Gen2 x4 per device.	Up to four PCIe 4.0 x8	Up to six PCIe 4.0 x4	Up to six PCIe 3.0 x4 or PCIe 4.0 x4²	One PCIe 3.0 x4	PCIe Gen3 x16 up to 4 per device	-	-	PCIe Gen3 x16 up to 4 per device	PCIe Gen3 x16 up to 4 per device	PCIe Gen3 x16 up to 4 per device	PCIe* Gen3 x8 up to 4 per device
Ethernet Hard IP	10G/25G/100G Ethernet with optional 1588 capability + RS-FEC (528, 514)/RS-FEC (544, 514)	10G/25G Ethernet with optional 1588 PTP capability + Firecode FEC/RS-FEC (528, 514)	10G/25G Ethernet with optional 1588 PTP capability + Firecode FEC/RS-FEC (528, 514)	10G Ethernet with optional 1588 PTP capability + Firecode FEC	10G Ethernet with optional 1588 PTP capability + Firecode FEC	-	50/100 Gbps Ethernet MACup to 4 per device PCIe Gen3 x16 up to 4 per device SR-IOV (four PF/2K VF)¹	10G/25G/100G Ethernet with optional 1588 capability + RS-FEC (528, 514)/RS-FEC (544, 514)	-	-	-	-
USB 3.1 Hard IP³	-	One channel with USB 3.1 controller in HPS block	One channel with USB 3.1 controller in HPS block	One channel with USB 3.1 controller in HPS block	One channel with USB 3.1 controller in HPS block	-	-	-	-	-	-	-
Notes: SR-IOV stands for Single-Root Input Output Virtualization. Supported for -4s speed grade (VCC=0.8V) devices only. The hardened USB 3.1 IP controller resides in the HPS block, and is supported for devices with GTS transceiver and HPS only.

FPGA Device Datasheets

Additional Resources

Topic	Agilex™ 7	Agilex™ 5	Agilex™ 3	Stratix® 10	Arria® 10	Cyclone® 10
Additional Resources	E-Tile transceiver PHY user guide	GTS Transceiver PHY User Guide: Agilex™ 5 FPGAs and SoCs	GTS Transceiver PHY User Guide: Agilex™ 3 FPGAs and SoCs	Stratix® 10 L- and H-Tile transceiver PHY user guide E-Tile transceiver PHY user guide AN 778 - Stratix® 10 transceiver usage	Arria® 10 transceiver PHY user guide	Cyclone® 10 transceiver PHY user guide

2. Design Flow and IP Integration

Where Can I Find Information on Transceiver Usage?

Use the E-Tile Channel Placement Tool in conjunction with the Stratix® 10 Device Family Pin Connection Guidelines, to swiftly plan protocol placements in the E-Tile prior to reading comprehensive documentation and implementing designs in the Quartus® Prime software. The Excel-based E-Tile Channel Placement Tool is supplemented with instruction, legend, revision, and protocols tabs.

Topic	Agilex™ 7	Agilex™ 5	Agilex™ 3	Stratix® 10	Arria® 10	Cyclone® 10
What Design Recommendations Should I Consider?	AN 886: Agilex™ 7 device design guidelines	Device Design Guidelines: Agilex™ 5 FPGAs and SoCs	Device Design Guidelines: Agilex™ 3 FPGAs and SoCs	Stratix® 10 device design guidelines	Arria® 10 GX/GT device errata and design recommendations Arria® 10 SX device errata and design recommendation	Cyclone® 10 GX device errata and design guidelines
Where Can I Find Information on Transceiver PHY IP Integration?	E-Tile transceiver PHY user guide Agilex™ 7 Clocking and PLL User Guide	GTS Transceiver PHY User Guide	GTS Transceiver PHY User Guide	Stratix® 10 L- and H-Tile transceiver PHY user guide E-Tile transceiver PHY user guide	Arria® 10 transceiver PHY user guide AN 738: Arria® 10 device design guidelines	Cyclone® 10 GX Transceiver PHY User Guide Cyclone® 10 GX Device Design Guidelines
Where Can I Find Information on Transceiver PHY IP Register Mapping?	F-Tile Auto-Negotiation and Link Training FPGA IP Register Map F-Tile PMA and FEC Direct PHY FPGA IP Register Map	GTS PMA/FEC Direct PHY FPGA IP Register Map for Agilex™ 5	GTS PMA/FEC Direct PHY IP Register Map for Agilex™ 3	Logical view of the Stratix® 10 L- and H-Tile transceiver registers	Logical view of the Arria® 10 transceiver registers	Logical view of the Cyclone® 10 transceiver registers
Analog Settings Guidelines				Stratix® 10 L-Tile/H-Tile pre-emphasis and output swing estimator	Arria® 10 pre-emphasis and output swing estimator	Cyclone® 10 and Arria® 10 pre-emphasis and output swing estimator

3. Board Design and Power Management

Topic	Agilex™ 7	Agilex™ 5	Agilex™ 3	Stratix® 10	Arria® 10	Cyclone® 10	Max® 10	Stratix® V	Arria® V	Cyclone® V	Max® V
Board Design Guidelines	Agilex™ 7 Configuration User Guide Agilex™ 7 Device Family High-Speed Serial Interface Signal Integrity Design Guidelines AN 114: Board Design Guidelines for FPGA Device Packages	GTS Transceiver Dual Simplex Interfaces User Guide AN 114: Board Design Guidelines for FPGA Device Packages	PCB Layout, Routing, and Power Distribution Network Design Guidelines: Agilex 3 FPGAs and SoCs	AN 766: Stratix® 10 Devices, High Speed Signal Interface Layout Design Guideline PCB Stackup Design Considerations for FPGAs	AN 114: Board Design Guidelines for FPGA Device Packages PCB Stackup Design Considerations for FPGAs	AN 114: Board Design Guidelines for FPGA Device Package PCB Stackup Design Considerations for FPGAs	AN 114: Board Design Guidelines for FPGA Device Packages PCB Stackup Design Considerations for FPGAs	AN 672: Transceiver Link Design Guidelines for High-Gbps Data Rate Transmission AN 114: Board Design Guidelines for FPGA Device Packages PCB Stackup Design Considerations for FPGAs	AN 114: Board Design Guidelines for FPGA Device Packages	AN 114: Board Design Guidelines for FPGA Device Packages PCB Stackup Design Considerations for FPGAs	AN 114: Board Design Guidelines for FPGA Device Packages PCB Stackup Design Considerations for FPGAs
Pin Connection Guidelines	Agilex™ 7 Device Family Pin Connection Guidelines	Pin Connection Guidelines: Agilex™ 5 FPGAs and SoCs	Pin Connection Guidelines: Agilex™ 3 FPGAs and SoCs	Stratix® 10 Device Family Pin Connection Guidelines	Arria® 10 GX, GT, and SX Device Family Pin Connection Guidelines	Cyclone® 10 GX Device Family Pin Connection Guidelines
Schematic Review	Agilex™ 7 Device Schematic Review Worksheet: F-Series and I-Series Agilex™ 7 Device Schematic Review Worksheet: M-Series	Agilex™ 5 Device Schematic Review Worksheet: D-Series and E-Series		Stratix® 10 Device Schematic Review Worksheet	Arria® 10 GX, GT, and SX Schematic Review Worksheet	Cyclone® 10 GX Schematic Review Worksheet
Power Management	Agilex™ 7 Power Management User Guide: F-Series and I-Series Thermal Modeling with the FPGA Power and Thermal Calculator AN 692: Power Sequencing Considerations for Agilex™ 7 Devices	Power Management User Guide: Agilex™ 5 FPGAs and SoCs	Power Management User Guide: Agilex™ 3 FPGAs and SoCs	Early Power Estimator (EPE) and power analyzer AN 692: Power Sequencing Considerations for Stratix® 10 Devices AN 750: Using the Altera PDN Tool to Optimize Your Power Delivery Network Design Device-Specific Power Deliver Network (PDN) tool 2.0 user guide	Early Power Estimator (EPE) and power analyzer AN 692: Power Sequencing Considerations for Arria® 10 Devices AN 750: Using the Altera PDN Tool to Optimize Your Power Delivery Network Design Device-Specific Power Deliver Network (PDN) tool 2.0 user guide	Early Power Estimator (EPE) and power analyzer AN 692: Power Sequencing Considerations for Cyclone® Devices AN 750: Using the Altera PDN Tool to Optimize Your Power Delivery Network Design Device-Specific Power Deliver Network (PDN) tool 2.0 user guide	Early Power Estimator (EPE) and power analyzer AN 750: Using the Altera PDN Tool to Optimize Your Power Delivery Network Design Device-Specific Power Deliver Network (PDN) tool 2.0 user guide	Device-Specific Power Deliver Network (PDN) tool 2.0 user guide	Early Power Estimator (EPE) and power analyzer AN 750: Using the Altera PDN Tool to Optimize Your Power Delivery Network Design Device-Specific Power Deliver Network (PDN) tool 2.0 user guide	Device-Specific Power Deliver Network (PDN) tool 2.0 user guide	Early Power Estimator (EPE) and power analyzer

Simulation Models & Tools

Advanced Link Analyzer

The Advanced Link Analyzer is a state-of-the art jitter/noise eye link analysis tool that allows you to quickly and easily evaluate high-speed serial link performance. It is an ideal pre-design tool to help you understand how FPGA solutions can fit your system requirements. It is also an effective tool for post-design support to assist in debug and validation.

Models

Development Kit User Guides

Topic	Agilex™ 7	Stratix® 10	Arria® 10
Development Kit User Guides	Agilex™ 7 F-Series FPGA Development Kit User Guide Agilex™ 7 F-Series Transceiver-SoC Development Kit User Guide	Stratix® 10 Development Kit User Guide Stratix® 10 GX Transceiver Signal Integrity Development Kit User Guide	Arria® 10 Development Kit User Guide Arria® 10 SoC Development Kit User Guide Arria® 10 GX Transceiver Signal Integrity Development Kit User Guide

4. Interoperability and Standards Testing

Topic	Agilex™ 7	Agilex™ 5	Agilex™ 3	Stratix® 10	Arria® 10	Cyclone® 10	Max® 10
Applications	Agilex™ 7 General-Purpose I/O User Guide: F-Series and I-Series	PHY Lite for Parallel Interfaces FPGA IP Core Release Notes	PHY Lite for Parallel Interfaces FPGA IP Core Release Notes	PHY Lite for Parallel Interfaces FPGA IP Core Release Notes	PHY Lite for Parallel Interfaces FPGA IP Core Release Notes	PHY Lite for Parallel Interfaces FPGA IP Core Release Notes
	PHY Lite for Parallel Interfaces FPGA IP Core Release Notes	General-Purpose I/O User Guide	General-Purpose I/O User Guide: Agilex™ 3 FPGAs and SoCs	AN 835: PAM4 signaling fundamentals
		LVDS SERDES User Guide	LVDS SERDES User Guide: Agilex™ 3 FPGAs and SoCs	AN 846: Stratix® 10 forward error correction
Models	IEEE 1149.6 BSDL files	IEEE 1149.6 BSDL files	IEEE 1149.6 BSDL files	IEEE 1149.6 BSDL files	IEEE 1149.6 BSDL files	IEEE 1149.6 BSDL files	IEEE 1149.6 BSDL files

5. Design Examples and Reference Designs

Topic	Agilex™ 7	Agilex™ 5	Stratix® 10	Arria® 10	Cyclone® 10
Design Examples and Reference Designs	High-Speed Transceiver Demo Designs - Agilex™ 7 Device I-Series with F-Tile High-Speed Transceiver Demo Designs - Agilex™ 7 Device F-series (E-Tile)	Altera Example Designs on GitHub	High-Speed Transceiver Demo Designs - Stratix® 10 TX Series High-Speed Transceiver Demo Designs - Stratix® 10 GX Series	Terasic DE10 Advanced with Arria® 10 SoC Board ACHILLES Instant Development Kit with Arria® 10 FPGA SoM Starter Board Arria® 10 Transceiver PHY Basic Design Examples High-Speed Transceiver Demo Designs - Arria® 10 Series	Cyclone® 10 Transceiver PHY Basic Design Examples

6. Training Courses and Videos

Recommended Training Courses

Topic	Description
E-Tile Clocking	Learn about the reference clocks available on the E-tile, and E-tile transceiver datapath clocks are generated and distributed.
GTS Transceiver Basics Training	This training introduces the basics of the Agilex™ 5 and Agilex 3 FPGA GTS transceiver is optimized for a wide range of applications in markets such as broadcasting, industrial, medical and communications, to name a few. This course will introduce you to the GTS transceivers and the building blocks that make up them.
Transceiver Toolkit Training	This online training will introduce you to the Transceiver Toolkit found in the Quartus® Prime Pro software and features like Auto Sweep and the Eye Viewer.
Transceiver Basics for 20 nm and 28 nm Devices	Learn the basic building blocks that are found in 20 and 28 nm FPGA transceivers used to support a range of high-speed protocols.
Stratix® 10 Transceiver Basics	Learn the basic building blocks that are found in Stratix® 10 FPGA transceivers used to support a range of high-speed protocols.
Building an Stratix® 10 FPGA Transceiver PHY Layer	Learn how to define the three resources that make up an Stratix® 10 FPGA transceiver PHY layer solution, namely, the transceiver PHY, the transceiver PLL and the transceiver reset controller.
Generation 10 Transceiver Clocking	Learn the clocking resources that are found in Arria® 10 and Cyclone® 10 FPGA transceiver blocks.

Other Training Courses

Transceiver training courses

Topic	Description
F-Tile Channel Placement Tool	The F-Tile Channel Placement Tool, in conjunction with the Device Family Pin Connection Guidelines, allows you to swiftly plan protocol placements in the product prior to reading comprehensive documentation and implementing designs in Quartus® Prime Pro software.

Title	Description
17G Transceiver Demo Video	Watch the first Agilex™ 5 FPGA E-Series Group B devices running 17Gbps transceivers in our lab.
Arria® 10 Device Configuration of a Simplex Transceiver	Watch this video to learn how to place an Arria® 10 device simplex transceiver with dynamic reconfiguration in the same physical transceiver channel.
Dynamic Reconfiguration of an Arria® 10 Device Transceiver	Watch this video to learn how to perform data rate changes using transmit (TX) phase-locked loop (PLL) switching and the embedded streamer in Arria® 10 devices.
How to Use the Transceiver Toolkit Part 1	Watch this four-part video to learn how to use the Transceiver Toolkit application, demonstrated on an Arria® 10 FPGA Development Kit. This video explains how to get the optimal physical medium attachment (PMA) settings for the transceiver.
How to Use the Transceiver Toolkit Part 2	Watch this four-part video to learn how to use the Transceiver Toolkit application, demonstrated on an Arria® 10 FPGA Development Kit. This video explains how to get the optimal PMA settings for the transceiver.
How to Use the Transceiver Toolkit Part 3	Watch this four-part video to learn how to use the Transceiver Toolkit application, demonstrated on an Arria® 10 FPGA Development Kit. This video explains how to get the optimal PMA settings for the transceiver.
How to Use the Transceiver Toolkit Part 4	Watch this four-part video to learn how to use the Transceiver Toolkit application, demonstrated on an Arria® 10 FPGA Development Kit. This video explains how to get the optimal PMA settings for the transceiver.
Arria® 10 Transceivers: Pre-Emphasis Basics	Learn the basics of the Arria® 10 Transceiver Pre-Emphasis feature. Compare simulated waveform versus silicon measurements.
Performing Dynamic Reconfiguration for the Arria® 10 Device Transceiver	Watch this video to learn how to perform data rate changes using TX PLL switching with the embedded streamer in Arria® 10 devices.
Reconfigure Arria® 10 Device Transceivers Using Embedded Streamer	Watch this video to learn how to perform dynamic reconfiguration with the Arria® 10 device transceiver Standard PCS using the embedded streamer.
Use the IBIS-AMI Model to Estimate Signal Integrity of Arria® 10 Device Transceiver	Watch this video to learn how to perform a signal integrity simulation with the Arria® 10 device transceiver IBIS-AMI model in the Advanced Link Analyzer. Additionally, this video covers eye diagram reporting.

Tools

Agilex™ 7 F-Series Device and Stratix® 10 Device E-Tile Channel Placement Tool

Download User Guide

Download E-Tile Channel Placement Tool for Agilex™ 7 FPGAs and SoCs

Agilex™ 5 Device Clocking and Datapath Tool

Download User Guide

Download Clocking and Datapath Tool for Agilex™ 5 FPGAs and SoCs

Agilex™ 5 Device TX Equalizer Tool

Download User Guide

Download the TX Equalizer Tool for Agilex™ 5 FPGAs and SoCs

Agilex™ 3 Device Clocking and Datapath Tool

Download User Guide

Download Clocking and Datapath Tool for Agilex™ 3 FPGAs and SoCs

Agilex™ 3 Device TX Equalizer Tool

Download User Guide

Download the TX Equalizer Tool for Agilex™ 3 FPGAs and SoCs

Stratix® 10 Device E-Tile Transceiver Debug Tool

The debug tool consists of two sub-tools

Status tool enables you to read and reset PMA parameters and log it in a file. It also enables you to perform adaptation flow (Internal/external loopback, initial adaptation), read and reset bit errors.
Tuning tool enables you to tune the transceiver with base line PMA parameter configurations for 10Gbps/28Gbps/56Gbps and with custom parameters it enables you to sweep PMA parameters and log it in a file. Use this tool to analyze the health of the transceiver channels in your Stratix® 10 Device E-Tile.

Download User Guide

Download the E-Tile Transceiver Debug Tool for Stratix® 10

Stratix® 10 Device L-Tile/H-Tile Transceiver PHY Debug Tool

This debug tool consists of four sub-tools:

Voltage tool enables you to measure the voltage at the receiver data sampling node and transmitter node
Channel Status tool enables you to check the status locked to data of receiver clock data recovery (CDR), calibration status, loopback status and PRBS generator/checker status
Adaptation status tool enables you to cross verify the configured adaptation registered bits against the golden bit settings -Golden bits are the recommended bit settings for a given register
Eye debug tool enables you to measure the eye height and/or eye width

Use this tool to analyze the health of the transceiver channels in your Stratix® 10 Device L-Tile/H-Tile

Download Tool Tutorial

Download the L-Tile/H-Tile Transceiver PHY Debug Tool for Stratix® 10

Arria® 10 Device Transceiver PHY - Fault Tree Analyzer

This interactive fault tree analyzer provides guidelines for troubleshooting issues you may encounter while using Arria® 10 Device Transceiver PHY. The analyzer consists of three sections:

Native PHY Debug
Link Tuning Debug
Dynamic Reconfiguration Debug

Use this fault tree analyzer to help you resolve Transceiver PHY issues and bring up your design as efficiently as possible. Use it along with the Arria® 10 Device Transceiver PHY Debug Tool

Download User Guide

Download the Transceiver PHY Fault Tree Analyzer for Arria® 10

Arria® 10 Device Transceiver PHY Debug Tool

This debug tool consists of the same four sub-tools as the Stratix® 10 version:

Voltage tool enables you to measure the voltage at the receiver data sampling node and transmitter node
Channel Status tool enables you to check the status locked to data of receiver clock data recovery (CDR), calibration status, loopback status and PRBS generator/checker status
Adaptation status tool enables you to cross verify the configured adaptation registered bits against the golden bit settings -Golden bits are the recommended bit settings for a given register
Eye debug tool enables you to measure the eye height and/or eye width

Use this tool to analyze the health of the transceiver channels in your Arria® 10 Device.

Download the Transceiver PHY Debug Tool for Arria® 10 Device

Additional Resources

Topic	Agilex™ 7	Agilex™ 5	Agilex™ 3	Quartus® Prime¹	Stratix® 10	Arria® 10	Cyclone® 10
Intellectual Property (IP) Core Release Notes	E-Tile Dynamic Reconfiguration Design Example Release Notes F-Tile Auto-Negotiation and Link Training for Ethernet FPGA IP Release Notes F-Tile Dynamic Reconfiguration Suite FPGA IP Release Notes F-Tile PMA and FEC Direct PHY Multirate FPGA IP Release Notes F-Tile PMA/FEC Direct PHY IP Release Notes	GPIO FPGA IP Release Notes GTS PMA/FEC Direct PHY IP Release Notes LVDS SERDES FPGA IP Release Notes	GPIO FPGA IP Release Notes GTS PMA/FEC Direct PHY IP Release Notes LVDS SERDES FPGA IP Release Notes	Quartus® Prime Design Suite Release Notes
FPGA Device Errata					Stratix® 10 GX L-Tile Production Device Errata Stratix® 10 SX Production Device Errata	Arria® 10 GX/GT Device Errata and Design Recommendations Arria® 10 SX Device Errata and Design Recommendations	Cyclone® 10 GX Device Errata and Design Guidelines
User Guides (Refer to the chapter on debug functions in the following user guides)	E-Tile transceiver PHY user guide F-Tile Architecture and PMA and FEC Direct PHY IP User Guide F-Tile Dynamic Reconfiguration Suite FPGA IP User Guide F-Tile PMA and FEC Direct PHY Multirate FPGA IP User Guide PHY Lite for Parallel Interfaces FPGA IP User Guide	PHY Lite for Parallel Interfaces FPGA IP User Guide	GTS Transceiver PHY User Guide: Agilex™ 3 FPGAs and SoCs	Quartus® Prime Pro and Standard Software User Guides	Stratix® 10 L- and H-Tile Transceiver PHY User Guide	Arria® 10 Transceiver PHY User Guide	Cyclone® 10 GX Transceiver PHY User Guide
Transceiver Registers Mapping Guide	F-Tile PMA and FEC Direct PHY FPGA IP Register Map	GTS PMA/FEC Direct PHY IP Register Map	GTS PMA/FEC Direct PHY IP Register Map for Agilex™ 3		Logical View of the Stratix® 10 L- and H-Tile Transceiver Registers	Logical View of the Arria® 10 Transceiver Registers	Logical View of the Cyclone® 10 Transceiver Registers
Notes: Transceiver Native PHY IP Release Notes are now found within Quartus® Prime Design Suite Release Notes.

Knowledge Base Solution

Still Have Questions?

Get answers for the most common design issues.

Search the Knowledge Base

Products

High-Performance

Mid-Range

Power and Cost-Optimized

AI Development Tools

FPGA Design & Simulation Tools

Embedded Design Tools & Software

IP Development Tools

High-Performance

Mid-Range

Power and Cost-Optimized

Interfaces

Memory Controllers

Digital Signal Processing & AI

Soft Embedded Processors

Transceivers & Basic Functions

Solutions

Design

FPGA Development Tools

Embedded Tools

Add-On Development Tools

Design Hubs

Developer Centers

Training

FPGA Developer Site

Design Store

All FPGA Documentation

Support

About

Contact Us

Transceiver PHY IP Support Center

Getting Started

1. Device and IP Selection

Which FPGA Device Family Should I Use?

FPGA Device Datasheets

Additional Resources

2. Design Flow and IP Integration

Where Can I Find Information on Transceiver Usage?

3. Board Design and Power Management

Simulation Models & Tools

Development Kit User Guides

4. Interoperability and Standards Testing

5. Design Examples and Reference Designs

6. Training Courses and Videos

Recommended Training Courses

Other Training Courses

Recommended Videos

FPGA Quick Videos

7. Debug

Tools

Additional Resources

Knowledge Base Solution

Still Have Questions?