Power Distribution Network

Power Distribution Network Support provides resources for Agilex™ 7, Agilex™ 5, Agilex™ 3, Stratix® 10, Arria® 10, Cyclone® 10, Stratix® V and Arria® V devices.

Get additional support for Agilex™ 7 System Architecture, Agilex™ 5 System Architecture and the Agilex™ 3 System Architecture, step-by-step guided journeys for standard development flows surfacing the key critical resources and documentation.

For other devices, search the Device and Product Support Collections.

The easy-to-use power distribution network (PDN) design tool is a graphical tool used with all FPGAs to optimize the board-level PDN. The purpose of the board-level PDN is to distribute power and return currents from the voltage regulating module (VRM) to the FPGA power supplies, and support optimal transceiver signal integrity and FPGA performance.

For each power supply, you must choose a network of bulk and ceramic decoupling capacitors. While you can use SPICE simulation to simulate the circuit, the PDN design tool provides a fast, accurate, and interactive way to determine the right number of decoupling capacitors for optimal cost and performance trade-offs. By determining the optimal set of decoupling capacitors for a given design, you can save board space and ease the board layout process.
 

You can select the number and values of the capacitors in the spreadsheet (see Figure 1), and the tool calculates the composite impedance of the PDN along with the impedance characteristics of the VRM, the decoupling capacitors and their mounting inductance, the PCB, and the FPGA with on-package and on-chip capacitors.
 

To achieve optimal performance, the composite impedance must meet the target impedance (see Figure 2) up until the PCB cutoff frequency (F_EFFECTIVE). The target impedance is derived from FPGA power requirements. The Power Analyzer in the Quartus® Prime and Quartus® II development software allows you to accurately analyze the FPGA's power consumption for each power rail.

The PDN printed circuit board design methodology is described in detail in AN 574: Printed Circuit Board (PCB) Power Delivery Network (PDN) Design Methodology. It also describes the role of the FEFFECTIVE in designing an efficient system power delivery solution.

Design with confidence using our tools and board design guidelines and get your design right the first time with the right performance and cost trade-offs.

Power Delivery Network (PDN) tool do not support Agilex™ 7 Devices (Agilex™ 7 Devices PDN design guideline is based on time domain simulation and worst step load at package level; however, PDN tool design guideline is based on frequency simulation and target impedance).

• AN 910: Agilex™ 7 Devices Power Distribution Network Design Guidelines
• Agilex™ 5 FPGAs and SoCs Power Distribution Network Design Guidelines
• Agilex™ 3 FPGAs and SoCs Power Distribution Network Design Guidelines
• AN 750: Using the FPGA PDN Tool to Optimize Your Power Delivery Network Design
• Device-Specific Power Delivery Network (PDN) Tool 2.0 User Guide
  • Power Delivery Network (PDN) Tool for Stratix® 10, Arria® 10 and Cyclone® 10 GX Devices (ZIP)
  • Power Delivery Network (PDN) Tool for MAX® 10 Devices (ZIP) For Arria® 10 devices, please do not use previous version of Arria® 10 device PDN tool combined in the MAX® 10 device PDN tool. The latest version of Arria® 10 device PDN tool and Stratix® 10 device PDN tool is already available through the link above.
  • Power Delivery Network (PDN) Tool 2.0 for Arria® V, Stratix® V, Cyclone® V, Cyclone® IV, and Arria® II GZ Devices (ZIP)
• Device-Specific Power Delivery Network (PDN) Tool User Guide
  • Power Delivery Network (PDN) Tool for Stratix® IV Devices (ZIP)
  • Power Delivery Network (PDN) Tool for Stratix® III Devices (ZIP)
  • Power Delivery Network (PDN) Tool for Arria® II GX Devices (ZIP)
• Power Delivery Network (PDN) Tool User Guide
  • Power Delivery Network (PDN) Tool (ZIP) (device agnostic)